• Accelerometer PCE-VM 40A rear view
  • Accelerometer PCE-VM 40A display
  • Accelerometer PCE-VM 40A application

Accelerometer PCE-VM 40A

Order no.: PCE-VM 40A
new
£ 3,011.00
£ 3,613.20
4250348714251
PCE-VM 40A
price ex. (VAT / delivery)
Delivery time: 1-2 working days

 

Accelerometer PCE-VM 40A
triaxial acceleration meter / mobile version with NiMH battery / FFT analysis
IP 64 protection / internal memory for up to 100,000 readings / alarm function
The PCE-VM 40A Accelerometer was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Accelerometer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40A Accelerometer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. You can choose between time-based and event-based recording, as well as between recording of short-time and long-time vibrations. It is also possible to set threshold levels which trigger an alarm signal when exceeded.
The Accelerometer is very easy to use and can be configured for different applications in no time. The measured data can easily be viewed on the integrated display of the device. Here you can see the vibration speed in all 3 directions. The Accelerometer has an integrated NiMH battery which makes it suited for mobile use on-site. A mains adaptor for stationary use is also included in delivery.

- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Integrated NiMH battery
- FFT analysis
- Internal memory for up to 100,000 readings
- Mains adaptor included in delivery
- Easy to use
- Threshold function

Technical specifications
Measuring unitsPeak value of vibration speed
Peak value of vibration acceleration
Supported standardsDIN 4150-3; BS 7385; SN 640312A
Vibration sensortriaxial piezo-electric acceleration sensor
Display range (peak) acceleration0.001 ... 15 m/s²
Display range (peak) speed0.01 ... 2,400 mm/s at 1 Hz
0.01 ... 30 mm/s at 80 Hz
(frequency-dependend)
Accuracy (reference value: 16 Hz)±3 %, ±2 digits, 100 Hz low pass
±3 %, ±2 digits, 398 Hz low pass
DisplayLCD, b&w, 128 x 64 pixel, backlight
3 peak values (x/y/z direction) or vector sum, main frequency, 50-lines FFT spectrum, battery status, date and time
Alarmwarning and alarm LEDs next to the display
relay output (chargeover contact, max. 100 VDC / 2 A)
Memorybuilt-in micro-SD card
max. 100,000 readings (x/y/z, frequency, date, time, device name)
Analogue digital convertor24 bit, sigma-delta
USB interfaceUSB 2.0, CDC mode, via VM2x-USB cable
BatteryNiMH, 4.8 V, charging time: 10 h
no battery power consumption when connected via USB (e.g. to an USB powerbank or a USB mains adaptor)
Battery service life5 ... 15 days, depending on the temperature and duty cycle
LanguagesGerman, English
Temperature range-20 °C ... +60 °C / -4 °F ... +140 °F
Protection classIP 64
Dimensions150 mm x 140 mm x 80 mm
5.9 in x 5.5 in x 3.1 in
Weight2 kg / 4.4 lbs

Delivery contents
1 x PCE-VM 40A Vibration Meter
1 x USB cable VM2x-USB
1 x Mains adaptor VM40-CH
1 x Instruction manual