Test Meters

- Measuring range: 0 ... 600°C / 32 ... 1112°F
- Measurement accuracy: ± 1.5°C / 2.7°F or 1% of the measured value
- Output: 4 ... 20-mA
- Cable length: 3 m / 9.8 ft
- incl. ISO Calibration Certificate

- Flash frequency: 50 ... 35000 FPM
- Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- with trigger input
- Incl. ISO calibration certificate

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F

The manometer PCE-PDA 100L is a reliable differential pressure gauge for pressure measurement of gases in the range of -100 to +200 kPa. The manometer PCE-PDA 100L has many different pressure measuring functions.

- Measuring range: -100 ... 200 kPa  / -14.5 ...  29 psi / -1 ... 2 bar
- Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
- Accuracy: ± 0.5% of final value
- Min and Max value memory
- Data logger and leak test
- Temperature measurement, flow measurement

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.

- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

- Measuring range: 1.20 ... 300.0 mm  / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F
- ICA incl. ISO Calibration Certificate

The relative pressure meter PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this pressure meter in the range between -100 ... 2000 kPa. The relative pressure meter PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

- Measuring range pressure: -100 ... 2000 kPa relative  / -14.5 ... 290 PSI
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple

- Measuring range: 0 ... 10 N, 0 ... 2.25 lbs
- Accuracy: ± 0.1% of the measuring range
- Memory for 100 measurements
- Pull and pressure force measurement
- 1600 Hz sampling rate
- Interface: USB
- 6 different measuring tips

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"

This Formaldehyde Meter HFX205 is designed to detect formaldehyde in air. The Formaldehyde Meter HFX205 shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Formaldehyde Meter HFX205 runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

- Range Formaldehyde: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

This Gas Detector is designed to detect formaldehyde in air. The Gas Detector shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The Gas Detector runs with the help of an electromechanical sensor and is designed to determine the current permitted limit. A measurement can be accomplished in less than 30 seconds.

- Range Formaldehyde: 0…10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

The PCE-TG 300-NO5 is a thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. Wall thicknesses under a coating can also be measured with the thickness gauge.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

- incl. ISO Calibration Certificate