Conductivity Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Surface Testing - Conductivity Meter for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive surface testing - conductivity meter for metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Multifunction Conductivity Meter PCE-BPH 20
£ 797.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multifunction conductivity meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the conductivity meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
Multifunction Conductivity Meter PCE-BPH 20-ICA incl ISO Calibration Certificate
£ 845.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The table-top multifunction conductivity meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the conductivity meter.

Measuring range:
- pH, mV, TDS
- Temperature, conductivity
- Salinity, resistance
- Large 7" touchscreen
- Bluetooth and USB interfaces
- 3 point calibration
- incl. ISO Calibration Certificate (for PH value only)
Surface Testing - Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Cal.
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive surface testing - conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Multifunction Conductivity Meter PCE-PHD-1-KIT1
£ 522.00
Price excl. VAT &. delivery
2 year Warranty

The Multifunction Conductivity Meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction conductivity meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 


- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

Conductivity Meter PCE-PHD 1-LF
£ 374.00
Price excl. VAT &. delivery
2 year Warranty

The Conductivity Meter PCE-PHD 1-LF is for checking the water quality. The portable conductivity meter is very suitable for controlling the conductivity in the water.


- Conductivity: 0 ... 200,0 µS/cm, 0,2 ... 2,000 mS/cm ...
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- Adjustable measuring rate
- Electrode for conductivity included

Multifunction Conductivity Meter PCE-PHD 1
£ 396.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-PHD 1 Multifunction Conductivity Meter is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction Conductivity Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included

NDT Test Instruments PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Multifunction Conductivity Meter PCE-PHD 1-ICA incl. ISO Calibration Certificate
£ 427.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-PHD 1-ICA Multifunction Conductivity Meter is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the Multifunction Conductivity Meter is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included
- incl. ISO Calibration Certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Conductivity Meter PCE-SM 11
£ 214.00
Price excl. VAT &. delivery
2 year Warranty

With the conductivity meter PCE-SM 11 conductivity in non-saturated solutions can be quickly and accurately determined. The Conductivity Meter PCE-SM 11 has a high measuring accuracy thanks to the automatic temperature compensation.


- Measurement range:  0.0 ... 12.0 % (weight percentage)
- Accuracy: ± 0.5 %
- Resolution: 0.01 %
- Temperature compensation: automatic from 0 to +50 °C / 32 ... 122 °F

 

Conductivity Meter PCE-PH 30
£ 173.00
Price excl. VAT &. delivery
2 year Warranty
The conductivity meter PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable conductivity meter PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Conductivity Meter PCE-CM 41
£ 157.00
Price excl. VAT &. delivery
2 year Warranty

With our conductivity meter PCE-CM 41 it is possible to measure conductivity value, the amount of all the solid material or dissolved salts  (TDS - Total Dissolved Solids) and the temperature. Our conductivity meter PCE-CM 41 is very easy to carry everywhere thanks to its small size. Auto ranges up to 20,000 PPM.


- EC conductivity: 0...2,000 µS/cm  /  0...20 mS/cm
- Salt content TDS: 0...2,000 mg/l (ppm)  /  20,000 mg/l (ppm)
- Temperature: 0.0...60 °C / 32 ... 140 °F
- Water resistant (IP 67)

Conductivity Meter PCE-PWT 10
£ 133.00
Price excl. VAT &. delivery
2 year Warranty

The conductivity meter is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

HVAC Meter PCE-VE 1500-22190
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
HVAC Meter PCE-VE 1500-38209
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission