Paint Thickness Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
£ 997.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-TG 300-NO5/90 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Paint Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the paint thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 921.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 907.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 885.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Roughness Tester PCE-RT 2300-ICA Incl. ISO Calibration Certificate
£ 2,251.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The roughness tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 roughness tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Incl. ISO calibration certificate
Paint Thickness Tester PCE-TG 300-P5EE-ICA incl. ISO calibration certificate
£ 1,237.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-TG 300-P5EE is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth
- incl. ISO calibration certificate
Ultrasonic Thickness Tester PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate
£ 997.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-TG 300-NO5/90 is an ultrasonic thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness tester. Wall thicknesses under a coating can also be measured with the ultrasonic thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth
- incl. ISO calibration certificate

Paint Thickness Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate
£ 738.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Material Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-TG 300-HT5-ICA incl. ISO calibration certificate
£ 1,166.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-TG 300-HT5 is a paint thickness tester for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the paint thickness tester. Wall thicknesses under a coating can also be measured with the paint thickness tester.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 12mm / 0.47"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 5MHz
- Bluetooth
- incl. ISO calibration certificate
Coating Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate