Paint Thickness Tester PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 921.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 907.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 885.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN0D5-ICA incl. ISO Calibration Certificate
£ 738.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Paint Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the paint thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Gauge PCE-CT 80-F5N3-ICA incl. ISO-Calibration Certificate
£ 921.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.


- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate 

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Paint Gauge PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Gauge PCE-CT 80-FN2D5-ICA incl. ISO-Calibration Certificate
£ 907.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Gauge PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate
£ 1,481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Material Thickness Meter PCE-CT 80-FN3-ICA incl. ISO-Calibration Certificate
£ 912.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate
Paint Gauge PCE-CT 80-FN1D5-ICA incl. ISO Calibration Certificate
£ 885.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO Calibration Certificate
Thickness Meter PCE-CT 80-FN2-ICA incl. ISO-Calibration Certificate
£ 894.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm
- Accuracy after foil calibration: ±(2% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
- incl. ISO-Calibration Certificate