The magnetic stirrer is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test.
- Number of stirring points 5
- Max. Stirring quantity: 2000 ml
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
This multiposition magnetic stirrer is particularly suitable for a series examination. The 15 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.
This multiposition magnetic stirrer is particularly suitable for a series examination. The 10 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.
The magnetic stirrer is a stirring instrument for up to 20 liters.
The speed of the magnetic stirrer can be adjusted. It is possible to set speeds between 200 and 2200 revolutions per minute.
The inductive magnetic stirrer, is a flat, space-saving laboratory magnetic stirrer. Due to the induction-based operation, a quiet operation and a flat design of the stirrer are made possible.
- Maximum stirring volume: 800 ml / 0.21 gallon based on water
The magnetic stirrer is suitable for volumes up to 10 liters. The magnetic stirrer has an adjustable speed range of 200 ... 2200 rpm. The speed can be changed step by step in 10 rpm. You can buy the magnetic stirrer here in our online shop.
- Drive of the stirring points: Motor
- Max. Stirring quantity: 10 l
- Adjustable speed: 200 ... 2200 rpm
- Accuracy Speed: ± 20 rpm - Stirrer field:Ø140 mm / 5.5 in
The advanced pH meter represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the pH meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors.
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.
- Endoscope cable length: approx. 2 m / 6.5 ft - Diameter: 3.8mm / 0.15" - Camera resolution 160,000 pixels each - Viewing angle front camera 120°, side camera 90° - Focusing distance 5 … 50 mm / 0.19 ... 1.96" each - Camera head length: 42 mm / 1.6" - Bending radius at 90° 35 mm / 1.3" - Live images from both cameras side by side - 7" touch screen for easy operation - Replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.
- Diameter: Ø2.2mm / 0.08" - Cable length: 1m / 3.2 ft - Camera direction: 90° - Resolution: 160,000 pixels - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
The table-top pH meter can be used to quickly and precisely analyze liquid samples. Thus, for example, water, alkalis, milk, wine and many other liquids can be checked for their quality with the pH meter.
Measuring range: - pH, mV, TDS - Temperature, conductivity - Salinity, resistance - Large 7" touchscreen - Bluetooth and USB interfaces - 3 point calibration - incl. ISO Calibration Certificate (for PH value only)
The weighbridge is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel weighbridge is made of solid corrosion and acid-resistant steel.
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.
- Diameter: Ø6mm / 0.23" - Cable length: 5m / 16.4 ft - Camera direction: 0° - Resolution: 1MP - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9" - incl. software - incl. force gauge PCE-DFG N 5K (0 ... 5000 N)
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gages, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9" - incl. software - incl. force gage PCE-DFG N 5K (0 ... 5000 N)
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
The PCE-TG 300-HT5 is a thickness meter for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. Wall thicknesses under a coating can also be measured with the thickness meter.
- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel) - Diameter: 12mm / 0.47" - Minimum diameter of pipes: 30 mm / 1.18" - Frequency: 5MHz - Bluetooth - incl. ISO calibration certificate
Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges / tension dynamometers. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9" - incl. software - incl. force gauge PCE-DFG N 5K (0 ... 5000 N)
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
The advanced pH meter represents precision, user-friendliness, and GLP compliance. With a high-resolution LCD display, the pH meter provides a clear and concise presentation of measurement values. GLP compliance is ensured through automatic data recording and traceable documentation. It allows measurement of pH or redox value and temperature with external sensors.
Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9" - incl. software - incl. force gauge PCE-DFG N 5K (0 ... 5000 N)
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***