Magnetic Stirrer PCE-MSR 405
£ 400.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test. 

- Number of stirring points 5
- Max. Stirring quantity: 2000 ml
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
Multiposition Magnetic Stirrer PCE-MSR 415
£ 440.00
Price excl. VAT &. delivery
2 year Warranty
This multiposition magnetic stirrer is particularly suitable for a series examination. The 15 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.

- Number of stirring points: 15
- Stirring quantity: 400 ml per stirring point
- Stirring speed: 300 ... 1500 rpm
- Timer and pulse function
- Change of direction: automatic
- Stainless steel platform
Multiposition Magnetic Stirrer PCE-MSR 410
£ 347.00
Price excl. VAT &. delivery
2 year Warranty
This multiposition magnetic stirrer is particularly suitable for a series examination. The 10 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.

- Number of stirring points: 10
- Stirring quantity: 400 ml per stirring point
- Stirring speed: 300 ... 1500 rpm
- Timer and pulse function
- Change of direction: automatic
- Stainless steel platform
Magnetic Stirrer PCE-MSR 450
£ 222.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is a stirring instrument for up to 20 liters. The speed of the magnetic stirrer can be adjusted. It is possible to set speeds between 200 and 2200 revolutions per minute. 

- Motor: brushless DC motor (BLDC)
- Number of stirring points: 1
- Maximum stirring volume: 20 l
- Speed range: 200 ... 2200 rpm (adjustable)
- Accuracy: +/- 1 rpm
Magnetic Stirrer PCE-MSR 110
£ 80.00
Price excl. VAT &. delivery
2 year Warranty
The inductive magnetic stirrer, is a flat, space-saving laboratory magnetic stirrer. Due to the induction-based operation, a quiet operation and a flat design of the stirrer are made possible.

- Maximum stirring volume: 800 ml / 0.21 gallon based on water
- Flat construction
- Silent and wear-free drive
- Timer
- Agitator in stainless steel IP 65
- 1 stirring position Ø 94 mm / 3.7"
- Variably adjustable 15 - 1500 rpm
Magnetic Stirrer PCE-MSR 150
£ 67.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is suitable for volumes up to 10 liters. The magnetic stirrer has an adjustable speed range of 200 ... 2200 rpm. The speed can be changed step by step in 10 rpm. You can buy the magnetic stirrer here in our online shop.

- Drive of the stirring points: Motor
- Max. Stirring quantity: 10 l
- Adjustable speed: 200 ... 2200 rpm
- Accuracy Speed: ± 20 rpm
- Stirrer field: Ø140 mm / 5.5 in
Magnetic Stirrer PCE-MSR 50
£ 27.00
Price excl. VAT &. delivery
2 year Warranty
The mini magnetic stirrer is suitable for applications in small laboratories. The mini magnetic stirrer can safely mix stirring quantities of 100 ... 1000 ml.

- Drive of the stirring points: Motorised
- Max. stirring quantity: 100 ... 1000 ml
- Adjustable speed: 0 ... 1600 rpm
- Stirring surface: Ø 88 mm
Color Matching PCE-CIC 10-US
£ 1,484.00
Price excl. VAT &. delivery
2 year Warranty

A Color Matching is used wherever products must have the same color properties during production. A Color Matching contributes to quality control. The Color Matching is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.


Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM
LED light
  D1729, ISO3664, DIN, ANSI, BSI

 

Color Viewing Box PCE-CIC 10-US
£ 1,484.00
Price excl. VAT &. delivery
2 year Warranty

A color lighting chamber is used wherever products must have the same color properties during production. A color lighting chamber contributes to quality control. The color lighting chamber is a simulation instrument which is capable of displaying certain situations in order to analyze color characteristics of individual samples by means of different light types.


Color assessment under different light types
- With hour counter
- Short warm-up time
- According to ASTM
LED light
  D1729, ISO3664, DIN, ANSI, BSI

 

Color Viewing Box PCE-CIC 11-US
£ 889.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-CIC 11-US color lighting chamber is a simulation instrument, which is mainly used in quality control. The color lighting chamber accurately  corrects light types and thus enables the direct comparison of products which must have special color characteristics.


- Simulation of different light types
- Hour counter for each light type
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

 

Color Matching PCE-CIC 11-US
£ 889.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-CIC 11-US Color Matching is a simulation instrument, which is mainly used in quality control. The Color Matching accurately  corrects light types and thus enables the direct comparison of products which must have special color characteristics.


- Simulation of different light types
- Hour counter for each light type
- Short warm-up time
- According to ASTM D1729, ISO3664, DIN, ANSI, BSI

 

Force Gage PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty
The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied with remote control indicator
Tension Dynamometer PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty
The tension dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 50,000 kg / 500 kN / 110,231 lb
- Resolution: 20 kg / 200 N / 44 lb
- Minimum load: 400 kg / 881 lb
- Supplied with remote control indicator
Weighing Hook PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 50 weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Hanging Scales PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 50 Hanging Scales are the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Crane Scale PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 50 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Suspended Scale PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty

The suspended scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The suspended scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator

Force Gauge PCE-DDM 50
£ 3,907.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-DDM 50 Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50 Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator