Magnetic Stirrer PCE-MSR 405
£ 400.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is equipped with a heater. Thus, the magnetic stirrer with heating, liquids can heat up to 120°C / 248°F and mix or stir at the same time. The magnetic stirrer with heating has 5 stirring points, so that several liquids can be stirred simultaneously in the laboratory during a test. 

- Number of stirring points 5
- Max. Stirring quantity: 2000 ml
- Adjustable up to 1500 rpm
- Maximum 120°C / 248°F
Multiposition Magnetic Stirrer PCE-MSR 415
£ 440.00
Price excl. VAT &. delivery
2 year Warranty
This multiposition magnetic stirrer is particularly suitable for a series examination. The 15 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.

- Number of stirring points: 15
- Stirring quantity: 400 ml per stirring point
- Stirring speed: 300 ... 1500 rpm
- Timer and pulse function
- Change of direction: automatic
- Stainless steel platform
Multiposition Magnetic Stirrer PCE-MSR 410
£ 347.00
Price excl. VAT &. delivery
2 year Warranty
This multiposition magnetic stirrer is particularly suitable for a series examination. The 10 synchronously rotating stirring points of the magnetic stirrer ensure the reproducibility of the results. The stirring speed of the magnetic stirrer can be set between 300 and 1500 revolutions per minute in steps of 10.

- Number of stirring points: 10
- Stirring quantity: 400 ml per stirring point
- Stirring speed: 300 ... 1500 rpm
- Timer and pulse function
- Change of direction: automatic
- Stainless steel platform
Test Stand PCE-MFI 400
£ 6,654.00
Price excl. VAT &. delivery
2 year Warranty
The Test Stand is used for rapid testing of the melt mass flow rate of plastics. The Test Stand device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Magnetic Stirrer PCE-MSR 450
£ 222.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is a stirring instrument for up to 20 liters. The speed of the magnetic stirrer can be adjusted. It is possible to set speeds between 200 and 2200 revolutions per minute. 

- Motor: brushless DC motor (BLDC)
- Number of stirring points: 1
- Maximum stirring volume: 20 l
- Speed range: 200 ... 2200 rpm (adjustable)
- Accuracy: +/- 1 rpm
Melt Flow Index Tester PCE-MFI 400
£ 6,654.00
Price excl. VAT &. delivery
2 year Warranty
The melt flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Material Flow Index Tester / Plastometer PCE-MFI 400
£ 6,654.00
Price excl. VAT &. delivery
2 year Warranty
The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Magnetic Stirrer PCE-MSR 110
£ 80.00
Price excl. VAT &. delivery
2 year Warranty
The inductive magnetic stirrer, is a flat, space-saving laboratory magnetic stirrer. Due to the induction-based operation, a quiet operation and a flat design of the stirrer are made possible.

- Maximum stirring volume: 800 ml / 0.21 gallon based on water
- Flat construction
- Silent and wear-free drive
- Timer
- Agitator in stainless steel IP 65
- 1 stirring position Ø 94 mm / 3.7"
- Variably adjustable 15 - 1500 rpm
Magnetic Stirrer PCE-MSR 150
£ 67.00
Price excl. VAT &. delivery
2 year Warranty
The magnetic stirrer is suitable for volumes up to 10 liters. The magnetic stirrer has an adjustable speed range of 200 ... 2200 rpm. The speed can be changed step by step in 10 rpm. You can buy the magnetic stirrer here in our online shop.

- Drive of the stirring points: Motor
- Max. Stirring quantity: 10 l
- Adjustable speed: 200 ... 2200 rpm
- Accuracy Speed: ± 20 rpm
- Stirrer field: Ø140 mm / 5.5 in
Magnetic Stirrer PCE-MSR 50
£ 27.00
Price excl. VAT &. delivery
2 year Warranty
The mini magnetic stirrer is suitable for applications in small laboratories. The mini magnetic stirrer can safely mix stirring quantities of 100 ... 1000 ml.

- Drive of the stirring points: Motorised
- Max. stirring quantity: 100 ... 1000 ml
- Adjustable speed: 0 ... 1600 rpm
- Stirring surface: Ø 88 mm
Surface Testing - Inspection Camera PCE-VE 400N4 1.5 m / 4-way-head / Ø 4 mm
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
The surface testing - inspection camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 4 mm, cavities with the smallest access can be viewed with the help of this inspection camera. The camera head of this surface testing - inspection camera can move freely in 4 directions.

- Cable / head diameter: 4 mm
- Direction of movement camera head: 4-way
- Camera head length: 18 mm
- Bending radius: 8 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP67 camera cable
- 1,000,000 pixel image resolution
Magnetometer PCE-MFM 4000-ICA Incl. ISO Calibration Certificate
£ 1,146.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The magnetometer is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

 

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

- Incl. ISO calibration certificate
Magnetometer PCE-MFM 4000
£ 974.00
Price excl. VAT &. delivery
2 year Warranty

The magnetometer is used in the laboratory and quality assurance to measure the strength of magnetic fields. The magnetometer is delivered with two different sensors. A magnetic field sensor is available for general measurements in the Gauss and milli-Tesla range, as well as a precision sensor for measurements in the milli-Gauss and micro-Tesla range.

 

- Tabletop device with 2 sensors

            General Probe Range: 0-3000 milli-Tesla (0-30,000 Gauss)

            Precision Probe Range: 0-300 micro-Tesla (0-3000 milli-Gauss)

- For static and changing magnetic fields

- Highly accurate Transverse Hall sensor

- Different units selectable  (mG / µT)

- Data storage on SD memory card

Accelerometer PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
Accelerometer / Vibration sensor is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The accelerometer / vibration sensor has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Analyzer PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration analyzer is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration analyzer has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Magnetometer PCE-MFM 2400+ICA incl. ISO Calibration Certificate
£ 823.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

- Measuring range up to 24,000 G and 2,400 mT
- Measuring direction: axial
- For measuring static magnetic fields
- Axial Hall sensor, cable length approx. 2 m / 6.6 ft
- incl. ISO Calibration Certificate
Videoscope PCE-VE 1500-38209
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this videoscope, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the videoscope consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Magnetometer PCE-MFM 2400-ICA incl. ISO Calibration Certificate
£ 823.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
With a measuring range of 2,400 mT, the magnetometer covers a wide range of measuring tasks. The magnetometer has an accuracy of 1%. This makes the magnetometer a very precise measuring device.

- Measuring range up to 24,000 G and 2,400 mT
- Measuring direction: transverse
- For measuring static magnetic fields
- Transverse Hall sensor, cable length approx. 3.3 ft., 1 m
- incl. ISO Calibration Certificate