The universal signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.
- Measuring range 0 ... 600 V AC/DC - Active and passive output signal - Display and keypad for configuration - Frequency measurement - DIN rail mounting - Display
The universal signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the universal signal converter are completely galvanically isolated.
- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
The current signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.
- Measuring range 0 ... 600 V AC/DC - Active and passive output signal - Display and keypad for configuration - Frequency measurement - DIN rail mounting - Display
The voltage signal converter has an adjustable measuring range of 0… 600 V AC/DC and can therefore measure a wide variety of voltages. For example, it is possible to connect the transmitter to the supply line in order to monitor the applied voltage.
- Measuring range 0 ... 600 V AC/DC - Active and passive output signal - Display and keypad for configuration - Frequency measurement - DIN rail mounting - Display
Our universal testing machine can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The motorized universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9" - incl. software - incl. force gauge PCE-DFG N 5K (0 ... 5000 N)
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
The current signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the current signal converter are completely galvanically isolated.
- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
The temperature signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the temperature signal converter are completely galvanically isolated.
- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
The voltage signal converter converts an analog input signal into a corresponding analog output signal. The input and output signals from the voltage signal converter are completely galvanically isolated.
- Over 100 combinations pre-selected
- Converts analogue input range
- Completely galvanic isolation
- Power supply 18 ... 265V AC / DC
The state-of-the-art air quality particle counting enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air quality particle counting is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The universal testing machine measures both tensile forces and compressive forces and this with a very high resolution. The tensile force and the compressive force are often determined in the test laboratory, e.g. to determine the yield point, the tear-off force, the force required to operate a button or switch. The supplied motorized test stand can be coupled and operated in various versions with our force gauges.
Force Gauge PCE-DFG N 5K - Measuring range: 0 ... 5000 N / 500 kg / 1100 lbs - Resolution: 1N / 0.22 lbs - Accuracy: ± 0.1% of the measuring range - Memory for 100 measurements - USB interface - Graphic display
Test Stand PCE-MTS500 - Force range: max. 5000 N / 500 kg / 1100 lbs - Travel path: max. 300 mm / 11.8" - Feed speed: 30 mm/min ... 230 mm/min / 1.18 ... 9.05 in/min
Our universal testing machine PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.
- Measuring range: max. 5000 N / 500 kg - Feed speed: 30 mm/min ... 230 mm/min - All PCE devices adaptable - Robust steel design
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
The digital universal indicator is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for digital universal indicator is 25 m or 50 m (82 ft or 164 ft).
- Function: convert analog signal into usable value - Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC - Display range: -1999 ... 9999 - Digit height: 100 mm / 3.9" - Number of outputs: 2 - Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC
The digital universal indicator is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for digital universal indicators is 25 m or 50 m (82 ft or 164 ft).
- Function: convert analog signal into usable value - Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC - Display range: -1999 ... 9999 - Digit height: 100 mm / 3.9" - Number of outputs: 2 - Voltage supply: 11 ... 36 V DC
Our universal testing machine can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The universal testing machine lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the universal testing machine offers the operator the most precise equality of test bench and sample.
- Force range: max. 5000 N / 500 kg / 1100 lbs - Travel: max. 300 mm / 11.8" - Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min - Manual or automatic procedure - incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***
The digital universal indicator is designed in such a way that the measured values displayed can be read from a large distance. With a digit height of 60 mm or 100 mm (2.3" or 3.9"), the reading distance for digital universal indicators is 25 m or 50 m (82 ft or 164 ft).
- Function: convert analog signal into usable value - Input signal: 4 ... 20 mA, ±20 mA DC, 0 ... 10 V DC, ±10 V DC - Display range: -1999 ... 9999 - Digit height: 60 mm / 2.3" - Number of outputs: 2 - Voltage supply: 85 ... 265 V AC / 120 ... 370 V DC
The state-of-the-art air sampler enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the air sampler is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art data logger enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the data logger is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.
- Real-time measurement from 0.3 μm ... 10 μm
- Output in particles/28.3L or particles/m³
- Visual and audible alarm when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement - Real-time display of clean room class ISO 14644-1