View / print user's manual of the UMU-100 Uni. Signal Converter
- For Pt100 sensors and thermo elements
- Error display
- Universal power supply
- Galvanic insulation (inputs and outputs)
- 2 optional alarm relays
- Voltage and current input
- Voltage and current output
- It can be connected to a display
Technical Specifications | ||
Input | Measurement range | Accuracy |
Pt100 | -200 °C ... 850 °C | ±0,2 °C |
Linear resistance | 0 Ω ... 10 kΩ | ±0,1Ω |
Potentiometer | 10 Ω ... 100 kΩ | --- |
Thermo element (depending on the thermo element type) | - 200 °C ... 2300 °C | ±2 °C |
Current (free programming) | 0 mA ... 20 mA 4 mA ... 20 mA | ±4 µA |
Voltage (free porgraming) | 0 V ... 1 V DC 0,2 V ... 1 V DC 0 V ... 5 V 1 V ... 5 V 0 V ... 10 V 2 V ... 10 V | ±0 µV |
Output | Range | Load |
Current | 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA | maximum 20 mA, 800 Ω, 16 V DC |
Voltage | 0 V ... 1 V DC 0,2 V ... 1 V DC 0 V ... 5 V 1 V ... 5 V 0 V ... 10 V 2 V ... 10 V
1 V ... 0 V DC 1 V ... 0,2 V DC 5 V ... 0 V 5 V ... 1 V 10 V ... 0 V 10 V ... 2 V | min. 500 kΩ |
Relays (close, open, Hold) | Maximum voltage: 250 V RMS | |
General Specifications | ||
Power supply | 24 V AC ... 230 V AC / 50 Hz ... 60 Hz 24 V DC ... 250 V DC | |
Max. absorbed power | ≤2,5 W | |
Response time (0 % ... 90 % / 100 % ... 0 %) | Temperature input: ≤1 s Current and voltage input: ≤400 ms | |
Calibration temperature | 20 °C ... 28 °C | |
Max. relative humidity | 90 % r.H. | |
Dimensions with front display | 109 x 23,5 x 116 mm | |
Dimensions without front display | 109 x 23,5 x 104 mm | |
Protection | Case: IP 50 Terminals: IP 20 | |
Weight | 175 g | |
Here you can see the different connection types of the UMU-100 Uni. Signal Converter | ||
Delivery contents
1 x UMU-100 Universal Signal Converter, 1 x user's manual