Current Signal Converter PCE-P30H

Order no.: PCE-P30H
£ 258.00
£ 309.60
PCE-P30H
price ex. (VAT / delivery)
The additional resistor is required if voltages >250 V DC are to be measured
Delivery time: 10 - 14 days
Transmitter with memory / DC input for voltage and current / 4 ... 20 mA or 0 ... 10 V output / DIN rail mounting / Alarm relay / LC display / Modbus RTU

The PCE-P30H transmitter is used for direct voltages and currents between 12 V ... 1000 V DC or currents up to 150 A via separate shunts. The transmitter can convert the measured signals into an analog standard signal. Furthermore, the measured values can be distributed to process control systems via Modbus RTU. The transmitter can optionally be equipped with an SD card or Ethernet. The PCEP30H transmitter is equipped with 2 relays for user alarm.


- SD card memory and internal memory
- DC input for voltage and current via shunts (shunt resistor)
- Output galvanically isolated
- Alarm relay
- Modbus interface
- LC display
- 35 mm mounting rails
Technical Specification
Input Measuring range Nominal measuring range Accuracy class
DC voltage 12 V -4 ... 12 V 0.2
48 V -4 ... 48 V  
100 V -4 ... 100 V  
250 V -4 ... 250 V  
600 V
With additional resistor D5 (see options)
-4 ... 600 V 0.2 + accuracy of additional resistor
1000 V
With additional resistor D5 (see options)
-4 ... 1000 V
DC power
Via shunt

Shunt: -150 ... 150 mV 0.2 + accuracy shunt
InterfacesRS485 (master / slave)
Analog output (galvanically isolated)4 ... 20 mA (max. 500 Ω)
0 ... 10 V (< 500 Ohm)
Alarm relaynormally open contact max. 5 A / 30 V DC / 250 V AC
Sensor supply24 V DC / 30 mA
Power consumption5 VA
Dimensions120 x 45 x 100 mm
DisplayLCD 2 x 8 characters
Mounting type35 mm DIN rail
Internal memory534,336 data records
Max. memory card size2 GB (FAT / FAT32) (136,512,000 data records)
Supply voltage85 ... 253 V AC / DC
20 ... 40 V AC / DC
Ambient conditions-25 ... 55 °C / 25 ... 95 % r.H

1 x Current Signal Converter with memory PCE-P30H
1 x User Manual