Pressure Sensor PCE-DMM 21

Order no.: PCE-DMM 21

Price (exclude VAT)

£ 502.00

Price (include VAT)

£ 602.40

Order no.

PCE-DMM 21

price ex. (VAT / delivery)

Accuracy (nominal pressure note)

Pressure Type

Measurement range (0.10 ... 0.25 bar only relative available)

Connection thread (Z00 & M73 only available for P> 1 bar)

Seal

Filling liquid

Order

Question / Callback

Delivery time: 10 - 14 days

Digital Pressure Sensor / Digital pressure to 40 bar / Relative and absolute pressure measurement / ± 0.125% FSO accuracy
The pressure sensor PCE-DMM 21 is suitable for flush sanitary installation. The pressure sensor may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure sensor has a food safe FDA approval. The flush mounting of the pressure sensor can be sterilized. The indicator on the pressure sensor is rotatable.

- To 400 Bar
- Relative Pressure Measurement
- Max-Min Function with reset
- 2 Backlit display
- Different units
- Stainless steel flush diaphragm

Nominal pressure relative inbar	0.1	0.16	0.25	0.40	0.60	1		1.6	2.5	4	6
Nominal pressure absolute inbar				0.40	0.60	1		1.6	2.5	4	6
Overpressure in bar	0.5	1	1	2	5	5		10	10	20	40
Burst pressure in bar	1.5	1.5	1.5	3	7.9	7.5		15	15	25	50

Nominal pressure relative / absolute in bar	10	16	25	40
Overpressure in bar	40	80	80	108
Burst pressure in bar	50	120	120	210
Negative pressure	-1 ... 0 bar; Overload: 5 bar; Burst pressure: 7.5 bar
Vacuum resistance	P > 1 Bar: unrestricted
General Technical Data
Accuracy							> 0.4 Bar: < ± 0.125 % FSO < 0.4 Bar: < ± 0.25 % FSO
Measuring rate							1/s
Long term stability							< ±0.1% FSO
Media							Fuels, oils, gases, water
Temperature ranges							Fluid: -20 ... 85°C / -4 ... 185°F Environment: -20 ... 70°C / -4 ... 158°F Storage: -30 ... 80°C / -22 ... 176°F
Pressure port / housing							Stainless steel 1.4404
Seal							FKM
Diaphragm							Stainless steel 1.4435
Parts that come into contact with water							Pressure port, seals, diaphragm
Display							LC Display
Power supply							2 x 3.6V lithium battery (1 / 2AA)
Battery life							1.5 years standby
Protection							IP65
Weight							ca. 300 g / < 1 lb

1 x Digital Pressure Sensor PCE-DMM 21

man-pressure-gauge-pce-dmm-20-21-50-51-en.pdf

Manual

Datasheet

Accessories

DAkkS Calibration Certificate for Pressure Gauges (Pressure Sensors)

Order no.: CAL-DAKKS-PM-B

DAkkS Calibration Certificate for Pressure Gauges (Pressure Sensors)

DAkkS calibration certificate for pressure sensors and manometers, certifies traceability to German national test standards.

- Calibration range: 10 ... 120 bar
- Accuracy 0.6 ... 0.1
- Calibration points: 27

N.B. calibration certificates are issued specifically for the customer and are excluded from the right of return.

Catalogue: Measuring Instruments / Test Meters / Manometer

£ 256.00

Price excl. VAT &. delivery
2 year Warranty

ISO Calibration Certificate CAL-PM (to 20 bar)

Order no.: CAL-PM

ISO Calibration Certificate CAL-PM (to 20 bar)

Certificate, e.g. for compliance with your DIN ISO 9000. For this purpose, we send the pressure gauge to an independent calibration laboratory. The measured values, the serial number and you as the client are recorded on this ISO certificate.

- 10 measuring points evenly distributed over the measuring range
- (up / down / max. 20 bar)
- for the sensors:
PS-100-5 (5 bar)
PS-100-20 (20 bar)

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Manufacturer: PCE Instruments

£ 197.00

Price excl. VAT &. delivery
2 year Warranty