Temperature Controller PCE-RE82

Order no.: PCE-RE82
£ 168.00
£ 201.60
PCE-RE82
price ex. (VAT / delivery)
Delivery time: 10 - 14 days
Universal analog input / two bar graph displays / programmable control sequence / 
PCE-RE82 with additional analogue input, RS485 interface / 
optional with continuous control output

The universal controller PCE-RE82 can be used to control temperature or other physical variables such as pressure, humidity or level. The analog input of this universal controller can process the various common signals and is freely scalable. Using the digital inputs, for example, a PLC control can influence the universal controller. The universal controller offers four outputs, which can be assigned different tasks depending on the application. In addition to the control function, they can also be used as signal or alarm outputs. Due to two internal control loops, each control parameter, a three-point control can also be implemented. The setpoint of the universal controller can be controlled by three sources. In addition to a fixed setpoint by the operator, this can also be controlled via the optional additional analogue input.

 

As a third possibility, programs with 15 segments each can be stored in the internal memory of the universal controller, according to which the command variable is controlled. Furthermore, four different parameter sets can also be defined for the PID control, which are then used by the user or as a function of the setpoint for the control. A parameter set can be assigned to each segment in the program mode. The man-machine interface consists, on the one hand, of four keys on the front side, which serve to parameterize the universal controller. To display the measured values ​​and other parameters, the universal controller is equipped with two 4-digit 7-segment displays. These are supported by two different color bargraphs, which can display different sizes of the control process. The current switching state of the outputs is indicated by LEDs.


- With seven-segment and bargraph displays
- Automatic search for the optimal control parameters
- 3-point control possible
- Universal analog input
- Memory for 15 programs
- PCE-RE82 with RS485 interface and continuous control outputs available


Inputs Resistance sensors: 2- or 3-wire PT100 and PT1000
thermocouples: Type J, T, K, S, R, B, E, N
Voltage: 0 ... 5/10 V
Current: 0/4 ... 20 mA
Current: 0/4 ... 20 mA
Control behavior P, PD, PI, PID, on / off control with hysteresis
display 2x 4-digit LED display
2x bar graph (21 segments)
Outputs 2/4 relay, NO contact,
2 A, 230 V
2x continuous control output:
0/4 ... 20 mASSR:
0/5 V
RS485 interface
Ambient temperature Operation: 0 ... 50 °C / 32 ... 122 °F
Humidity <85% rh (non-condensing)
Dimensions 96 x 48 x 93 mm / 3.7 x 1.8 x 3.6 in
Control panel cutout 92 x 45 mm / 3.6 x 1.7 in
Supply voltage 85 ... 253 V AC / DC
20 ... 40 V DC
Protection class Front: IP 65
Rear: IP 20
mass <200 g / 7 oz
Assembly Mounting clips with clamping screws, Connection via terminal block
Standards EN 61010-1 CAT III
Universal controllers are used wherever process variables need to be monitored and controlled. The universal input can be used for nearly all process signals and sensor types. For example, when changing the sensors, the universal controller can be used further and no new device is needed. This saves costs and time in the operating sequence since only the characteristic curve has to be changed. Universal controllers also find their application in mobile measuring and control buildings where a certain control process takes place for a certain period of time and the conditions change after some time. The universal controller can be used in many process areas due to the various input types and initial conditions such as continuous and discontinuous control.

1 x Temperature Controller PCE-RE82
1 x Mounting material
1 x Operating instructions