Industrial Measurement Products and Solutions

Temperature Controller PCE-RE62

Order no.: PCE-RE62
£ 116.00
£ 139.20
PCE-RE62
price ex. (VAT / delivery)
Delivery time: 10 - 14 days
Universal regulator for DIN rail mounting / OLED display / housing suitable for distribution systems / Self-optimizing controller system / relay, SSR or analogue output

The PCE-RE62 is a universal controller for various sensor signals and control modes. The universal controller can process RTD temperature sensors, thermocouple and DC standard signals on the input side. On the output side, a relay is always available on the PCE-RE62 universal controller. Optionally additional relays, a 0/5 V output to the SSR control or an analogue output can be selected. Furthermore, a sensor supply of 24 V / 40 mA can be installed in the controller on the output side.

 

The voltage supply from this universal controller is produced by screw connections and can be between 20 ... 253 V AC / DC. The PCE-RE62 universal controller is mounted on a 35 mm DIN rail. Thanks to the modern design and the compact dimensions, the controller can be installed in any control cabinet or distribution system. The measurement and control parameters are displayed via the OLED display. The programming is carried out via the keys or the optional RS485 interface using the programming software. 
The universal controller has a self-optimizing PID control process. Furthermore, a simple on-off control is also adjustable. All electrical connections on the controller are electrically isolated from each other.

- Self-optimizing PID control
- Universal input
- DIN rail mounting
- Relay, 0/5 V or analog output selectable

Inputs Pt100: -100 ... 850 ° C (± 0.2% v. Mb + 1 digit)
Type J: -100 ... 1200 ° C (± 0.2% v. Mb + 1 digit)
Type K: -100 ... 1370 ° C (± 0.2% v. Mb + 1 digit)
Current: -20 mA ... 20 mA (± 0.2% v. Mb + 1 digit)
Voltage: -60 ... 60 mV (± 0.2% v. Mb + 1 digit)
Voltage: -10 ... 10 V (± 0.2% v. Mb + 1 digit)
Outputs Relay: Normally open / 230 V 5 A SC
Current: Continuous 0/4 ... 20 mA; Load: Max. 500 Ohm
Voltage: 0 .. 10 V; Impedance: Min. 1 kOhm
Logic output: 0/5 V; Max 30 mA
Sensor supply: 24 V / 40 mA DC
interface RS485
Protocol: Modbus RTU
Mode: 8N2, 8E2; 8O1, 8N1
Baud rate: 4800; 9600; 19200, 38400, 57600
Display OLED 128 x 64 pixels
Dimension 53 x 110 x 60.5 mm / 2 x 4.3 x 2.3 in
Assembly 35 mm DIN rail
Mass 200 g / 7 oz
Degree of protection Front: IP30
Connection: IP20
Power supply 22 ... 60 V AC / 20 ... 60 V DC
60 ... 253 V AC / 60 ... 300 V DC
Operating temperature -10 ... 55 °C / 14 ... 131 °F / <95% rh:
Storage conditions -25 ... 70 °C / -13 ... 158 °F / non-condensing
Installation direction Vertical
Heating time 15 minutes
Electromagnetic compatibility EN61000-6-2
EN61000-6-4
Degree of pollution 2
Installation Level III
Stress resistance Power supply: 300 V
Fair entrance: 50 V

1 x Temperature Controller PCE-RE62 (in selected configuration)
1 x User manual