Temperature Controller PCE-RE72
£ 174.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.


- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

Temperature Indicator PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The temperature indicator is a measuring device for stationary measurement of relative humidity and temperature. This temperature indicator consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA
Temperature Controller PCE-RE110P
£ 133.00
Price excl. VAT &. delivery
2 year Warranty
The 2 channel process controller / universal input controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the temperature controller, make it possible for the PID controller to be used universally.

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
- 2 measuring inputs
Temperature Controller PCE-RE55-J
£ 142.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by thermocouples type J in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.


- Power supply: 85 ... 253 V AC / DC
- Sensor Input: Thermocouple type J
- Measuring ranges: up to max. 900 °C (selectable)
- Output: Relay or SSR output (selectable)

Temperature Controller PCE-RE55-K
£ 142.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by thermocouples type K in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.


- Power supply: 85 ... 253 V AC / DC
- Sensor Input: Thermocouple type K
- Measuring ranges: up to max. 1300 °C (selectable)
- Output: Relay or SSR output (selectable)

Temperature Controller PCE-RE55-PT
£ 142.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by the Pt100 sensor in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.


- Power supply: 85 ... 253 V AC / DC
- Sensor Input: for Pt100 sensor
- Measuring ranges: up to max. 600 °C (selectable)
- Output: Relay or SSR output (selectable) 

Temperature Controller PCE-RE55-S
£ 142.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by thermocouples type S in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.


- Power supply: 85 ... 253 V AC / DC
- Sensor Input: Thermocouple type S
- Measuring ranges: up to max. 1600 °C
- Output: Relay or SSR output (selectable) 

Temperature Controller PCE-RE100P
£ 120.00
Price excl. VAT &. delivery
2 year Warranty
The process controller / universal input controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the PID controller, make it possible for the PID controller to be used universally.

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
Temperature Controller PCE-RE22T
£ 102.00
Price excl. VAT &. delivery
2 year Warranty

The 2-point process controller / temperature controller is a compact PID controller for a wide range of tasks. As an input signal, this 2-point temperature controller PCE-RE22 processes resistance sensors and thermocouples. Different operating modes can be selected for optimum control of the control variable. Starting with a simple on / off control with adjustable hysteresis up to the PID control, the 2-point temperature controller offers a wide range of possibilities.


- Signal input: temperature signals (PT100, PT1000, J, T, K, S, R, B, E, N, L
- Possible control characteristics: P, PD, PI, PID, On / Off control
- Front is protected to IP 65
- 4 LEDs for status display

Temperature Controller PCE-RE22P
£ 102.00
Price excl. VAT &. delivery
2 year Warranty
The 2-point process controller / temperature controller is a compact temperature controller for use in a wide range of tasks. This 2-point temperature controller PCE-RE22P processes the process signals 0 ... 20mA, 4 ... 20 mA, 0 ... 5 V and 0 ... 10 V as input signals. Different operating modes can be selected to optimally regulate the controlled variable to the reference variable.

- Power supply: 230 V AC, 110 V AC, 24 V AC (selectable)
- Process signals: 0/4 ... 20 mA, 0 ... 5/10 V
- Output: Relay / SSR (selectable)
- Manual control mode
Wind Speed Alarm Controller PCE-WSAC 50W 24
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Wind Speed Alarm Controller PCE-WSAC 50W 230
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
Temperature Indicator PCE-EMD 5
£ 703.00
Price excl. VAT &. delivery
2 year Warranty
The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
Temperature Indicator PCE-EMD 10
£ 703.00
Price excl. VAT &. delivery
2 year Warranty
The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
Temperature Indicator PCE-EMD 5-ICA incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
- incl. ISO Calibration Certificate
Temperature Indicator PCE-EMD 10-ICA Incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The temperature indicator can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate
Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA incl ISO calibration cert.
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm controller, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Temperature Meter PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The temperature meter is a measuring device for stationary measurement of relative humidity and temperature. This temperature meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA