In-Process Moisture Sensor for Grain PCE-A-315
£ 6,444.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-A-315 inline or in-process moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control

 

In-Process Moisture Meter for Bulk Materials PCE-MWM 240-B
£ 5,073.00
Price excl. VAT &. delivery
2 year Warranty

Suitable for determining the humidity of bulk substances, this in-process moisture meter for bulk materials can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

In-Process Bulk Material Moisture Meter PCE-MWM 240-A
£ 4,442.00
Price excl. VAT &. delivery
2 year Warranty

Designed specifically for use in humidity measurement of bulk materials, this humidity sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

 - Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output
In-line Process Refractometer iPR HR²
£ 9,743.00
Price excl. VAT &. delivery
2 year Warranty
The automatically operating digital process refractometer iPR HR² (High Resolution) measures the refractive index continuously and thus, the concentration of a binary or quasi-binary liquid mixture. They are especially developed for the checking of liquids with very low solid concentrations (e.g., Light drinks). The iPR HR² has a very high resolution and precision.

- Measuring range: 1.3320 - 1.3720 / 0 - 25 Brix 
- Resolution: 0.000005 nD / 0.002 Brix
- Accuracy: ±0.00004 nD, ±0.02 Brix
- Suitable for applications in Pharmacy, Nutraceuticals, Diet drinks, and Salinity
- Stainless head IP69K rated for chemicals and food

In-line Process- Refractometer iPR FR²
£ 9,055.00
Price excl. VAT &. delivery
2 year Warranty
In-line process digital refractometer iPR FR² with extremely short reaction time for continuous measurement and real-time process control with an analogue data output. It is characterized by minimal size and weight and has an excellent price-performance ratio.


- Measuring range: B1: 1.3320 - 1.5300 / 0 - 100 Brix
- Resolution: 0.00001 nD 0.01 Brix
- Accuracy: ± 0.00007 nD ±0.05 Brix (at 20 °C / 68 °F)
- Explosion-proof version: ATEX Class Ex II 1G Ex ia II C T4

In-line Process- Refractometer IPR Basic3
£ 7,740.00
Price excl. VAT &. delivery
2 year Warranty

The fully automatic process digital refractometer IPR Basic3 continuously measures the refractive index and thus the concentration of solids in solutions or the mixing ratios of binary or quasi-binary liquid mixtures. The measurement is independent of process air, turbidity, colour of the process solution and the light intensity of the LED.


- Measuring range: 1.32000 – 1.52000 nD 0 – 90 Brix
- Resolution: 0.00001 nD 0.01 Brix
- Accuracy: ±0.00014 nD ±0.1 Brix (at 20 °C / 68 °F)
- IP69K protection TÜV tested

Process Calibrator PCE-123
£ 493.00
Price excl. VAT &. delivery
2 year Warranty

PCE-123 is a process calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the calibrator useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

pH Controller PCE-PHC 10
£ 237.00
Price excl. VAT &. delivery
2 year Warranty
The process controller / pH controller  measures and regulates the pH of various substances and is able to influence the pH value. The pH controller is a classic 2-point controller, depending on the application, the controller can be used to influence the liquid in the direction of alkaline or acidic. 

- Measuring range: 0 ... 14 pH
- Measuring range: 0 ... 65°C / 32 ... 149°F
- Large LED display
- 2 control relays for pH and temperature
- Connection via BNC and screw contacts
- For water treatment, electroplating ...
- Sensors selectable
In-line Process- Refractometer iPR-C2 S
£ 4,998.00
Price excl. VAT &. delivery
2 year Warranty

Compact in-line refractometer iPR-C2 S with extremely short reaction time for continuous measurement and real-time process control with an analogue data output. It is characterized by minimal size and weight and has an excellent price-performance ratio.

- Process temperature (max.): Stainless steel: +80 °C / 176 °F
- Measuring range: 1.3320 - 1.4209 nD 0 - 50 Brix
- Resolution: 0.0001 nD 0.05 Brix
- Accuracy: ± 0.0002 nD ±0.15 Brix (at 20 °C / 68 °F)
- Select connecting flange appropriately!

Process Calibrator PCE-123-ICA incl. ISO Calibration Certificate
£ 623.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-123 is a process calibrator used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use process calibrator provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the process calibrator useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Temperature Controller PCE-RE72
£ 174.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a compact PID controller which can be used in a wide range of applications. On the input side, this temperature controller processes the widely used process signals 4 ... 20 mA and 0 ... 10 V as well as resistance sensors and thermocouples. The temperature controller can be used very flexibly, since different operating modes are available. Besides the simple on / off control with adjustable hysteresis, the digital controller also offers various combinations of the PID control. Thanks to the SMART PID control, this temperature controller achieves the setpoint value very quickly and with a slight overshoot.


- Two 4-digit LED displays
- Two output relays
- Front protected to IP65
- Analogue universal input

Wind Speed Alarm Controller PCE-WSAC 50W 24
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
Wind Speed Alarm Controller PCE-WSAC 50W 230
£ 1,059.00
Price excl. VAT &. delivery
2 year Warranty
The wind speed alarm controller PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
In-line Process- Refractometer iPR-C2 Al
£ 4,403.00
Price excl. VAT &. delivery
2 year Warranty

In-line digital refractometer iPR-C2 Al with extremely short reaction time for continuous measurement and real-time process control with an analogue data output. It is characterized by minimal size and weight and has an excellent price-performance ratio.

- Process temperature (max.): Aluminium: +60 °C / 140 °F
- Measuring range: 1.3320 - 1.4209 nD 0 - 50 Brix
- Resolution: 0.0001 nD 0.05 Brix
- Accuracy: ± 0.0002 nD ±0.15 Brix (at 20 °C / 68 °F)
- Select connecting flange appropriately!

Process Indicator PCE-N30U
£ 168.00
Price excl. VAT &. delivery
2 year Warranty

The process indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the process indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the process indicator.


- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA incl ISO calibration cert.
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Wind Speed Alarm Controller PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm controller, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Temperature Controller PCE-RE110P
£ 133.00
Price excl. VAT &. delivery
2 year Warranty
The 2 channel process controller / universal input controller is used for temperature and process control. The various inputs and outputs, which are installed as standard on the temperature controller, make it possible for the PID controller to be used universally.

Measurement functions:
- Process flow
- mV
- Process voltage
- Resistance
- Autotune PID
- Memory for several PID parameters
- RS485 Modbus interface
- 2 measuring inputs
Temperature Controller PCE-RE55-J
£ 142.00
Price excl. VAT &. delivery
2 year Warranty

The process controller / temperature controller is a simple temperature controller for control tasks. The input signal of the thermostat is processed by thermocouples type J in different temperature ranges. Optionally the simple temperature controller can also be equipped with a PID switch.


- Power supply: 85 ... 253 V AC / DC
- Sensor Input: Thermocouple type J
- Measuring ranges: up to max. 900 °C (selectable)
- Output: Relay or SSR output (selectable)