Laboratory Power Supply PCE-LPS 4305

Order no.: PCE-LPS 4305
£ 369.00
£ 442.80
4250348719959
PCE-LPS 4305
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Laboratory Power Supply 
Laboratory Power Supply with USB charging function / serial and parallel switchable /
4 infinitely variable outputs / for various applications / outputs can be switched off 

Thanks to the many different connections, different consumers can be connected to the laboratory power supply and operated at the same time. In addition, with the laboratory power supply it is possible to switch channel 1 and channel 2 internally in series and parallel in addition to the normal output mode. As a result, the user receives twice the voltage or double current from the laboratory power supply for his application at the push of a button.

The outputs even on the laboratory power supply can be switched on and off at the same time. This makes it possible to set the laboratory power supply before the outputs are activated. Another special feature is the built-in USB interface on the laboratory power supply. It can be used to charge mobile end users. 

- 4 mm safety banana sockets
- Handle for mobile use
- 4 individually adjustable channels
- with USB fixed voltage regulator
- Switchable to parallel and series connection
- self-regulating active cooling

Channel 1 and 2 continuously variable voltage output:
Voltage output
0 ... 30 V
Current output5 A
Stability≤ 1 x 10 ^ 4 + 3 mV (± 10% of the nominal voltage)
Load stability≤ 1 x 10 ^ 4 + 3 mV (I ≤ 3 A)
 ≤ 2 x 10 ^ 4 + 3 mV (I> 3 A)
Ripple (5Hz ~ 1MHz)≤1 mVrms (5 Hz ... 1 MHz)
Recovery time<100 µs (at 50% of the load stability and a minimum load of 0.5 A)
Temperature coefficient<300 ppm / ° C
  
Channel 1 and 2 continuously variable current output:
Current output0 ... 5 A
Stability≤ 1 x 10 ^ 4 + 3 mA
Load stability≤ 1 x 10 ^ 4 + 3 mA (I ≤ 3 A)
 ≤ 2 x 10 ^ 4 + 5 mA (I> 3 A)
Ripple≤3 mA
  
Channel 3

Output voltage3 ... 6.5 V (+8%)
Output current0 ... 1 A
Stability≤5 mV
Load stability≤15 mV
Ripple (5Hz ~ 1MHz)≤2 mVrms
  
Channel 4 
Output voltage8 ... 15 V (+8%)
Output current0 ... 1 A
Stability≤5 mV
Load stability
≤15 mV
Ripple (5Hz ~ 1MHz)≤2 mVrms

 
USB interface (only fixed voltage regulator)
Output voltage5 VDC
Output current2 A
Electrical isolation 
Housing with output connections<20 MΩ at 50 VDC
Housing with power cord<30 MΩ at 50 VDC
  
More specifications 
Input600 W.
Operating conditions0 ... 40 ° C, <80% RH non-condensing
Storage conditions-1 ... 70 ° C, <80% RH non-condensing
Display accuracy± (0.5% + 2 digits)
Housing with output connections<20 MΩ at 50 VDC
Housing with power cord<30 MΩ at 50 VDC
Dimensions255 x 150 x 305 mm
Weightapprox. 9 kg

1 x laboratory power supply PCE-LPS 4305
1 x IEC cord
1 x instruction manual