Power Supply Unit

The Laboratory Power Supply is a completely newly designed, linearly regulated laboratory power supply in a modern design and with the latest technology. The desktop power supply supports a voltage range of 0 ... 30 V and a current range of up to 5 A DC. Thanks to the 3-digit blue 14 mm LED display for voltage and current values, a quick and precise reading from the desktop power supply is possible.

- for voltages up to 30 V and 5 A.
- 2 displays for current and voltage
- Output can be switched off separately
- Overload protection, short-circuit proof
- higher efficiency for better effectiveness

A Programmable Power Supply is used in the professional laboratory, for example in development. Such a programmable power supply helps the operator to provide the right voltages in a matter of seconds.

- 1 adjustable output up to 30 V and 5 A.
- adjustable via PC with software
- additionally with two fixed voltage regulators

The newly developed AC / DC power supply has two outputs. The AC voltage output is separated from the DC voltage output of the AC / DC power supply. These outputs on the AC / DC power supply are set synchronously and infinitely using a rotary control. The measured applied voltage and the flowing current are shown at the outputs on the display of the AC / DC power supply. The measuring device of the AC / DC power supply can be switched from AC to DC at the push of a button.

- Switchable from AC to DC output voltage
- Automatic circuit breakers for each output
- "Smoothing" function for a smoother DC
- Handle for easy transportation
- large stepless rotary control
- with current and voltage measurement

Thanks to the many different connections, different consumers can be connected to the laboratory power supply and operated at the same time. In addition, with the laboratory power supply it is possible to switch channel 1 and channel 2 internally in series and parallel in addition to the normal output mode. - 4 individually adjustable channels - with USB fixed voltage regulator - Switchable to parallel and series connection

The Laboratory Switching Power Supply has a voltage output of up to 500 V. This means that even consumers who need a higher voltage can be checked with the laboratory switching power supply. This enables transformers to be checked for their winding ratio using the laboratory switched-mode power supply. In order to minimize the risk of electric shock, the connection side of the laboratory switching power supply is equipped with 4 mm safety sockets. - 4 individually adjustable channels - Output voltage up to 500 V. - Handle for mobile transportation - self-regulating active cooling - 4 mm safety banana sockets - Protective conductor connection on the connection side

The Programmable Power Supply can be connected to the supplied software and operated completely from a remote workstation. The connection to the programmable power supply can be established either via the USB or via the Ethernet interface. This means that the programmable power supply can be freely positioned in a building. In addition, entire voltage and current profiles can be stored. This means that the programmable power supply can also be used in a company's development department. - Connection via LAN and USB - Switchable to parallel and series connection - Programmable current and voltage profiles - fully controllable with the software - With 3 levels of fixed voltage regulator - 2 stepless voltage outputs - Target and actual display for a better overview - different display layouts