Multi-channel Paperless Recorder PCE-KD5-WGH

Order no.: PCE-KD5-WGH
£ 563.00
£ 675.60
PCE-KD5-WGH
price ex. (VAT / delivery)
Delivery time: 10 - 14 days
Multi-channel paperless recorder PCE-KD5-WGH with analog or binary inputs / Modular design / IP65 housing / Ethernet / USB
The multi-channel paperless recorder can be used for the acquisition, visualization, storage, regulation and control of measurement data and process sequences. The paperless recorder is supplied in an IP65 wall housing and can therefore also be used outdoors. These possibilities make the multi-channel paperless recorder suitable for almost all conceivable applications. The recorded process and switching signals are placed on the internal 60 logical channels by the multi-channel paperless recorder and can be offset in a variety of ways. Optionally, the 1.5 GB internal memory in the multi-channel paperless recorder can be used to log data with a maximum sample rate of 10 Hz. The human-machine interface consists of a color TFT display with a touchscreen. The multi-channel paperless recorder can display the recorded measured values ​​in 8 display modes. The communication of the multi-channel paperless recorder with higher-level process control systems or lower-level sensors or measuring transducers can be handled via various digital interfaces. RS485/232, USB or Ethernet are available if the slots are appropriately equipped in the multi-channel paperless recorder. A mouse or keyboard can even be connected to the multichannel paperless recorder via these interfaces.

- Maximum of 4 analog universal inputs
- Different outputs possible
- Ethernet, RS485 and USB interfaces
- IP65 wall housing
Technical specifications
Inputs (max.)2 or 4 universal inputs, isolated: 
0/4 ÷ 20 mA (also totalizer mode)
0/1 ÷ 5V, 0/2 ÷ 10V 
Thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST); -10 ÷ 25 mV, -10 ÷ 100 mV, 0 ÷ 600 mV
RTD (2/3 wire): Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN -83M-53852), Cu'50, Cu'100 (PN-83M-53852)
Resistance 0 ... 300 Ω, Resistance 0 ... 3 kOhm
2 universal pulse counters / rate meters, (max. 5 kHz)
max. 5 digital inputs 24V DC
Outputs (max.)2 or 4: analog 4 ... 20 mA (passive, isolated, resolution 14 Bit)
SPST relay 1A / 250V
SSR passive (OC with PWM)
Mixed outputs (2 x REL / 2 x 4 ÷ 20 mA or 2 x REL / 2 x SSR passive or 2 x 4 ÷ 20 mA / 2 x SSR)
Transmitter supply / sensor supply24 V / 200 mA 
Digital interfacesbasic version: RS-485, 1 x USB-Host
ETE version: 1 x Ethernet cable via RJ45 built-in plug
ETEC version: 1 x Ethernet connected to M12 connector
ETR version: 1 x Ethernet wired via RJ45 built-in plug + 2nd RS-485 interface
ETRC Version: 1 x Ethernet M12 plug wired + 2. RS-485-interface
Display3.5" TFT, graphics-capable, color (16 bit), 320 x 240 pixels, touchscreen
Supply voltage (selectable)19 ... 50 V DC / 16 ... 35 V AC
85 ... 260 V AC/DC
Power consumption15 VA typical, 20 VA max.
Degree of protectionIP65
Data memory1.5 GB (sufficient for 50 days, 60 channels, measuring rate 1 Hz)
Storage ratemax. 10 Hz or max. 200 values/s
Operating temperature (optionally selectable)0 ... +50 °C / 32 ... 122 °F
-20 ... 50 °C / -4 ... 122 °F
Dimensions166 x 161 x 103 mm / 6.5 x 6.3 x 4.0" (without screw connections)
166 x 191 x 103 mm / 6.5 x 7.5 x 4.0" (with screw connections)
Housing material ABS

1 x Multi-channel Paperless Recorder PCE-KD5-WGH (in the desired configuration)
1 x Operating manual