Power Indicator PCE-N27D
£ 14,200.00
Price excl. VAT &. delivery
2 year Warranty
The power indicator measures 1-phase all network parameters. Power, voltage and power measurements are not a problem for the power indicator. The current can be measured directly from the power indicator up to 63 A. The power indicator is particularly suitable for compliance with the energy management Regulation ISO 50001 - Measurement current, voltage, real power and frequency.

- Current directly
measurable up to 63 A - DIN rail mounting
Power Analyzer PCE-PA 8500
£ 2,916.00
Price excl. VAT &. delivery
2 year Warranty
The power analyzer redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The power analyzer allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
Weight Indicator PCE-SD 3000U
£ 2,124.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The weight indicator is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weight indicator are the standard EU size (1200 x 800 mm).

- Weighing range: 0 ... 3000 kg
- Readability: 1 kg
- Calibration value: 1 kg
- Verifiable M III
Power Analyzer PCE-830-2
£ 2,398.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-2 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Power Meter PCE-830-2
£ 2,398.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-2 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Power Meter PCE-PA 8500
£ 2,916.00
Price excl. VAT &. delivery
2 year Warranty
The power meter redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The power meter allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
Weight Indicator PCE-SD 1500U
£ 1,957.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The weight indicator is a verifiable, calibrated U-shaped pallet scale intended for mobile use. The dimensions of the calibrated weight indicator are the standard EU size (1200 x 800 mm).


- Weighing range: 0 ... 1500 kg
- Readability: 0.5 kg
- Calibration value: 0.5 kg
- Verifiable M III

 

Power Analyzer PCE-830-1
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Power Analyzer PCE-830-3
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-3 Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

Power Meter PCE-830-1
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Power Meter PCE-830-3
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-3 Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

Power Indicator PCE-N27P
£ 178.00
Price excl. VAT &. delivery
2 year Warranty
The power indicator measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

  • Measures up to 63 A directly
  • Measuring about 1A / 5A transducer possible
  • Measurement of U, I, f, P
  • DIN rail
  • Power Indicator PCE-N30U
    £ 168.00
    Price excl. VAT &. delivery
    2 year Warranty

    The power indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the power indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the power indicator.


    - 21-point scaling
    - IP 65 protection on the front
    - Three-colored display
    - Two alarm outputs

    Portable Power Analyzer PCE-830-2
    £ 2,398.00
    Price excl. VAT &. delivery
    2 year Warranty

    The PCE-830-2 Portable Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This Portable Power Analyzer also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


    - PCE-830 + PCE-6802 amp clamp (1000 A)
    - Electrical conductor pick-up: 55 mm / 2.1 in diameter
    - Range selection: manual (10 A, 100 A, 1000 A)
    - Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
    - Sampling rate: 2 sec.
    - Memory size: 512 kB (max. 52,000 values (single phase)

    Power Analyzer PCE-PA 8300-2
    £ 2,763.00
    Price excl. VAT &. delivery
    2 year Warranty

    The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


    - Voltage measurement range of 10 V ... 600 V AC
    - Current measurement range of (Set 2) 30 A ... 3000 A AC
    - Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
    - Simultaneous display of harmonics and waveform
    - Graphic Phasor diagram
    - Captures transients including dip, swell, and outage

    Portable Power Analyzer PCE-PA 8300-2
    £ 2,763.00
    Price excl. VAT &. delivery
    2 year Warranty

    The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase Portable Power Analyzer that features:


    - Voltage measurement range of 10 V ... 600 V AC
    - Current measurement range of (Set 2) 30 A ... 3000 A AC
    - Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
    - Simultaneous display of harmonics and waveform
    - Graphic Phasor diagram
    - Captures transients including dip, swell, and outage

    Portable Power Analyzer PCE-PA 8500
    £ 2,916.00
    Price excl. VAT &. delivery
    2 year Warranty
    The portable power analyzer redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The portable power analyzer allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

    - Voltages: 1 ... 1000 V
    - Current: 15 ... 3000 A AC
    - Graphical representation of waveform and vector graphics
    - Data logger with 8 GB storage
    - LAN and USB data interface
    - Includes flexible current clamps
    - Compliance with standards: IEC61000-4-30, 61000-4-15, 
      61000-4-7, EN50160
    Power Analyzer PCE-PA 8300-1
    £ 2,661.00
    Price excl. VAT &. delivery
    2 year Warranty

    The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


    - Voltage measurement range of 10 V ... 600 V AC
    - Current measurement range of (Set 1) 20 A ... 1200 A AC
    - Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
    - Simultaneous display of harmonics and waveform
    - Graphic Phasor diagram
    - Captures transients including dip, swell, and outage