Panel Indicator PCE-N24H

Order no.: PCE-N24H
£ 83.00
£ 99.60
PCE-N24H
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Digital Panel Indicator with 4-digit LED, 20 mm digit height / 
IP65 front / for 100 V, 250 V, 400 V, 5 A DC 
The digital panel meter PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable at the digital panel meter PCE-N24H. By means of the programming adapter PCE-PD14 you can also configure the settings of the digital panel meter on a computer, or read out the measured data. The solid synthetic enclosure of the digital panel meter PCE-N24H provides a good protection even at locations with rough environmental conditions.

- Connection via screw clamp
- Configuration via software
- 4-digit LED
- IP65 front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Display red on black

General Technical Specifications of the Digital Panel Indicator PCE-N24H
Input (arbitrary)

± 100 V DC
± 250 V DC
± 400 V DC

0 ... 100 V DC
0 ... 250 V DC
±1 A DC
± 5 A DC

Accuracy ± (0.2 % FS + 1 dgt.)
Internal resistance10 Ω ± 1 %
Scaling2-point-scaling
Display4-digit, 7-segments, LED, digit height: 20 mm
Display range-1999 ... 9999
Power Source for Sensor (arbitrary)24 V DC, max. 30 mA
Surrounding temperatureDuring Operation: -10 °C ... +55 °C
Storage: : -25 °C ... +85 °C
Diameters96 mm x 48 mm x 64 mm
Size of switch board92 mm x 45 mm (according to DIN)
Power Source (arbitrary)24 V AC
110 V AC
230 V AC
85 ... 253 V AC/DC
20 ... 40 V AC/DC
Power Consumption of sensor (arbitrary)24 V / 30 mA
Protection ClassFront: IP 65
Weight< 200 g
AssemblyMounting clips with clamp screws,
Connection via plug board
EnclosureSolid synthetic enclosure

Delivery content of the Digital Panel Indicator PCE-N24H
1 x digital panel meter PCE-N24H, 1 x instruction manual
Additional components

- PCE-PD14 programming adapter (please order separately)
To set the different parameters of the PCE-N24 series digital indicators the PCE-PD14 adapter is required. By means of the included software the PCE-N24H digital indicator can be set through the USB port.