Electric Vehicle EV Tester / EV Test PCE-EVSE-KIT2-ICA incl ISO Cal Certificate
£ 1,305.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EV Test Instrumentis specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. 

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
- incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
Electric Vehicle EV Tester / EV Test Instrument PCE-EVSE-KIT2
£ 1,091.00
Price excl. VAT &. delivery
2 year Warranty
The EV Test Instrument is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EV Test Instrument. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
Electrical Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate
£ 3,302.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
- incl. ISO-Calibration Certificate
Electrical Tester PCE-830-2-ICA incl. ISO Calibration Certificate
£ 2,827.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

Electrical Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Electrical Tester PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

EVSE Measuring Device PCE-EVSE-KIT2-ICA incl. ISO Calibration Certificate
£ 1,305.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device. 

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
- incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
Electrical Tester PCE-360-ICA incl. ISO Calibration Certificate
£ 1,753.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 

Electrical Tester PCE-PA 8000-ICA incl. ISO Calibration Certificate
£ 1,913.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-PA 8000 is a portable handheld Electrical Tester used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

- True RMS measurement for ACA, ACV
- True power: W, KW, MW
- VA, KVA, MVA, VAR, KVAR, MVAR
- PF (power factor), phase angle (Φ)
- KWH, KVAH, KVARH, PFH
- Voltage measurement range: 10 ... 600 ACV
- Current measurement range: 0.2 ... 1200 ACA
- Real-time current, voltage and power consumption measurement
- Built-in data recorder with adjustable sample rate: 2 ... 7,200 sec.
- Incl. ISO Calibration Certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Electrical Tester 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Clamp on Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate
£ 3,302.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The clamp on tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The clamp on tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
- incl. ISO-Calibration Certificate
Electric Vehicle EVSE Tester PCE-EVSE-KIT2
£ 1,091.00
Price excl. VAT &. delivery
2 year Warranty
The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
Environmental Tester PCE-428-EKIT-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The environmental tester PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental tester is equipped with an octave band frequency filter. Optionally, the environmental tester can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate

Clamp on Tester PCE-830-2-ICA incl. ISO Calibration Certificate
£ 2,827.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830 Clamp on Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Clamp on Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

PAT Tester/ Portable Appliance Testing Eqpt PCE-EVSE-KIT2-ICA incl ISO Cal Cert.
£ 1,305.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The PAT Tester is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester. 

- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- Up to 1000 V terminal voltage
- Low Ohm measurement
- Direct connection for wallboxes
- Adapter with charging plugs type 1 and type 2
- PE conductor test
- Integrated Schuko socket
- incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
HVACR Tester PCE-830-2-ICA incl. ISO Calibration Certificate
£ 2,827.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The HVACR Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This HVACR Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate