Hotline

Technical advice

 Technical Hotline

Monday - Friday
8.00am - 4.00pm

0161-464902-5

PCE Instruments meters product presentation.

Would you like a product presentation via Skype?
Send us an email:

  1. You are here:
  2. Home
  3. Force Gage PCE-DFG N 5K
Order no.: PCE-DFG N 5K

Force Gage PCE-DFG N 5K

£ 944.00
£ 1,132.80
:
4250348717887
PCE-DFG N 5K
price ex. (VAT / delivery)
Delivery time: 1-2 working days

Description

 PCE-DFG N Force Gage series
with external measuring cell and USB interface for connection to a PC 


The force gage measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gage is supplied with an external measuring cell. Depending on the model, the force gage can measure up to 10,000 N / 2,248 lbs. Models for 1,000 N / 225 lbs, 2,500 N / 562 lbs and 5,000 N / 1,124 lbs are still available. Various eyelets or hooks with M10 or M12 thread can be adapted to the measuring cells, but your own devices with this thread can be mounted on the measuring cell. 

The force gage is equipped with a USB interface. This interface makes it possible to read the measurement data into the PC software. This makes it possible to create measurement logs and save and export them. The force gage has a graphic LCD that displays the measured values ​​both numerically and graphically. Furthermore, the force measuring device is protected to IP54 and can therefore also be used in harsh industrial environments, as well as train and pressure tests can be carried out outdoors in bad weather conditions easily. 

Various force test stands are available for adaptation to the force gage. The internal memory and the included hooks, extensions and tips complete the performance of this force gage. A special feature of the PCE-DFG N force gage is that the measuring cells are interchangeable among the models. By entering the sensitivity in mV / V, all measuring cells can be used with just one handheld device.

Highlights

- USB interface
- Graphic display
- Fast response time
- PC software
- Memory for 100 measurements
- Measuring cells easily changeable

Specification

Measuring range 0 ... 5,000 N / 1,124 lbs 
Resolution 1 N / 0.22 lbs
Accuracy ± 0.1% of the measuring range
Measurement units N, kg, lb, KPa
Display 2.8" TFT graphic display
Alarm Modes Inside, Outside, Crack, Shutdown
Sampling rate 6 ... 1600 Hz
Storage 100 measurements
Power supply NiMH battery, 6V / 1600-mAh
Battery life About 10 hours
Power adapter / charging adapter     12V / 1A
Outputs Interface: USB
Switching output: 12V / 50-mA
Protection class IP 54
Operating and storage conditions -10 ... 50°C / 14 ... 122°F
5 ... 95% rh non-condensing
Mounting thread Measuring cell
Up to 1,000 N / 225 lbs
2,500 ... 10,000 N / 562 ... 2,248 lbs    
M10
M12
   
Dimensions 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in
Weight 540 g / 1.2 lbs
   
   


Delivery Scope

1 x Force Gage PCE-DFG N 5K
1 x Load cell
2 x Eyebolt
1 x USB cable
1 x Charger
1 x PC software
1 x User manual

Downloads

Accessories

Accessories

Clamp Jaw PCE-SJJ013 for Test stand
£ 155.00

Price excl. VAT &. delivery
2 year Warranty

Clamping device with large opening width for pull or push test of block, glass, and board type materials components.

  • Capacity 5000 N / 1,124 lbs
  • Material is iron
  • Opening is 5 mm 
  • M10 threaded connection
Test Instruments manufacturer
Clamp Jaw PCE-SJJ11 for Teststand
£ 155.00

Price excl. VAT &. delivery
2 year Warranty

Clamping device with large opening width for pull or push test of cable, rigid material or electronic components.


  • Capacity 5000 N / 1,124 lbs
  • Material is iron
  • Opening is 4 mm 
  • M10 threaded connection
Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ01 Adapters for Pressure Tests
£ 80.00

Price excl. VAT &. delivery
2 year Warranty

Adapter for pressure force testing of sponge, foam glass, rock material, etc.

  • Max. capacity: 5 kN / 5,000 N / 1,124 lbs
  • Diameter: 16 mm
  • Threaded connection: M10

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ04 Adapter Stamp Round for Pressure Tests
£ 80.00

Price excl. VAT &. delivery
2 year Warranty

Adapter-stamp for pressure force test of spring and sponge etc.

  • Max. Capacity: 3 kN / 3,000 N / 674 lbs
  • Diameter: 50 mm
  • Threaded connection: M10

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ06 Adapter Clamps for Tensile Tests
£ 155.00

Price excl. VAT &. delivery
2 year Warranty

Adapter clamps for tensile testing of wire and filaments.

  • Max. capacity: 5 kN / 5,000 N / 1,124 lbs  
  • Threaded connection: M10

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ09 Fork Holder for Tensile and Compression Tests
£ 155.00

Price excl. VAT &. delivery
2 year Warranty

Fork holder for tensile and pressure tests.

  • Max. capacity: 5 kN / 5,000 N / 1124 lbs
  • Threaded connection: M10

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ012 Tensioning Device for Tensile Tests
£ 155.00

Price excl. VAT &. delivery
2 year Warranty

Tensioning device for tensile tests.

  • Max. capacity: 0.2 kN /200 N / 45 lbs
  • Max. opening: 3 mm
  • Threaded connection: M10

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ017 Universal Clamping Device
£ 472.00

Price excl. VAT &. delivery
2 year Warranty

Universal clamping device for tensile tests of rubber, sheet metal, bales, etc.

  • Max. capacity: 5 kN / 5,000 N / 1,124 lbs
  • Opening max: 4 mm
  • Threaded connection: M10

Test Instruments manufacturer
Test Stand
Set of thrust washers (square) for engine test stand PCE-MTS500
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Set of thrust washers (square) for engine test stand PCE-MTS500.

Test Instruments manufacturer
Test Stand
Thrust washer set (round) for engine test bench PCE-MTS500
£ 213.00

Price excl. VAT &. delivery
2 year Warranty

Thrust washer set (round) for engine test bench PCE-MTS500.

Test Instruments manufacturer
Force Gauge / Digital Force Gauge
PCE-SJJ015 Clamping Device for Test Stand
£ 166.00

Price excl. VAT &. delivery
2 year Warranty

Clamping device with large opening width for peel test of block, glass and cardboard.

  • Capacity 5000 N / 1,124 lbs
  • Max. opening 33 mm / 1.29 in 
  • M10 threaded connection

Test Instruments manufacturer
Test Stand
Test Stand for Force Gauge PCE-MTS500
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Our test stand for force gauge PCE-MTS500 can be coupled and operated in a wide variety of versions with our force gauges, the PCE series. The test stand for force gauge lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the test stand for force gauge offers the operator the most precise equality of test bench and sample.

  • Measuring range: max. 5000 N / 500 kg
  • Feed speed: 30 mm/min … 230 mm/min
  • All PCE devices adaptable
  • Robust steel design
  • ** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***

Test Instruments manufacturer
Re-Calibration for Force Gauge over 50kg / 500N
£ 214.00

Price excl. VAT &. delivery
2 year Warranty

ISO re-calibration incl. certificate for force gauge over 50 kg / 500 N / 112 lbs. This is often required to comply with DIN ISO 9000.


If your calibration certificate expires, you can easily return your meter for re-calibration. We carry out the calibration and send you the device with a new calibration certificate.

Calibration certificates are issued specifically for the customer and are excluded from the right of return

Test Instruments manufacturer