Air Quality Meter Gasman-FL "Flammable Gases"
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
This air quality meter is designed as a cost-effective solution for applications where protection against a specific combustible or toxic gas is required. The Gasman air quality meter is a single gas detector.

- Gas detector for flammable gases
- Range: 0...100%
- Alarm: 20%
- Memory for 5000 events
- Data logger for 900 hours of storage with 1 minute intervals
- Interface for calibrating, configuring and reading out the data
- Weight: 130g / 4.5 oz
- incl. charger
Benchtop Scale PCE-TB 1.5
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The benchtop scale is characterised by a wide range of applications. The scale features a bi-directional RS-232 interface and USB interface.


- Weighing capacity: 1500 g
- Readability: 0.05 g
- Weighing plate: 316 x 223 mm
- Calibrateable

 

Car Measuring Device PCE-DSX 20 with Trigger Input
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The car measuring device PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Checkweighing Scale PCE-TB 1.5
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The checkweighing scale is characterised by a wide range of applications. The checkweighing scale features a bi-directional RS-232 interface and USB interface.


- Weighing capacity: 1500 g
- Readability: 0.05 g
- Weighing plate: 316 x 223 mm
- Calibrateable

 

Compact Balance PCE-TB 1.5
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The compact balance is characterised by a wide range of applications. The balance features a bi-directional RS-232 interface and USB interface.

 


- Weighing capacity: 1500 g
- Readability: 0.05 g
- Weighing plate: 316 x 223 mm
- Calibrateable

 

Condition Monitoring Stroboscope PCE-DSX 20 with Trigger Input
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The condition monitoring stroboscope PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This condition monitoring stroboscope has a small design and has a low weight. Thus, the tachometer can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
Condition Monitoring Thermometer PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The condition monitoring thermometer is a highly accurate 1-channel temperature measuring device. The condition monitoring thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Contact Thermometer PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The contact thermometer is a highly accurate 1-channel temperature measuring device. The contact thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Counting Scale PCE-TB 1,5
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The counting scales stands out due to their multifunctional range of application. But not only the large range of functions of the device is outstanding, the communication options are interesting as well. The scales features a bi-directional RS-232 interface and USB interface.

 


- Weighing capacity: 1500 g
- Readability: 0.05 g
- Weighing plate: 316 x 223 mm
- Calibrateable

 

 

Differential Pressure Manometer PCE-P50-ICA Incl. ISO Calibration Certificate
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Differential Pressure Manometer PCE-P50-ICA with highest accuracy and best performance. With this manometer you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The manometer is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate
Differential Pressure Meter PCE-P50-ICA Incl. ISO Calibration Certificate
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The differential pressure meter PCE-P50-ICA with highest accuracy and best performance. With this differential pressure meter you can not only measure. The pressure readings can easily be transferred online to a PC or laptop. The differential pressure meter is ideal for use in industry, in service and in the laboratory.

- Range: ± 6900mbar / ± 100 psi
- Resolution: 4mbar
- Accuracy: ± 0.3% of full scale
- RS-232 interface
- Handheld measuring device
- Incl. ISO calibration certificate
Digital Thermometer PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer is a highly accurate 1-channel temperature measuring device. The digital thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor
Dissolved Oxygen Data-Logging Meter PCE-PHD 1-O2
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The Dissolved Oxygen Data-Logging Meter PCE-PHD 1-O2 is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.


- Oxygen: 0 ... 20 mg / l
- Real-time data logger
- SD card memory (16 GB max.)
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement
- Electrode for oxygen included

Dissolved Oxygen Meter PCE-PHD 1-O2
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The Dissolved Oxygen Meter is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.


- Oxygen: 0 ... 20 mg / l
- Real-time data logger
- SD card memory (16 GB max.)
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement
- Electrode for oxygen included

Dissolved Oxygen Meter PCE-PHD 1-O2
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The Dissolved Oxygen Meter PCE-PHD 1-O2 is a true all-rounder for checking the water quality. The portable oxygen meter is used to control the water parameters pH (optional), temperature (optional), conductivity (optional), salinity (optional) and oxygen.


- Oxygen: 0 ... 20 mg / l
- Real-time data logger
- SD card memory (16 GB max.)
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement
- Electrode for oxygen included

Environmental Meter PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The environmental meter with microprocessor is a high precision 1-channel temperature gauge. The environmental meter with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Environmental Tester PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty

The environmental tester with microprocessor is a high precision 1-channel temperature gauge. The environmental tester with microprocessor is ideal for use with various Pt100 sensors. Due to the fact that it uses 4-wire technology, it has a very fast response time and precision.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2 % r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Food Thermometer PCE-HPT 1
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The microprocessor Food Thermometer is a highly accurate 1-channel temperature measuring device. The microprocessor Food Thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor