With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:
- Humidity: 0 ... 100% RH
- Ambient temperature: -20 ... 60 °C / -4 ... 140 °F
- Wet bulb temperature: 0 ... 60 °C / 32 ... 140 °F
- Dew point temperature: -20 ... 60 °C / -4 ... 140 °F
- Interface: Bluetooth
- MIN / MAX / HOLD function
- incl. sinter filter

- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface

The climate meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the climate meter can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface

The closing force measuring device is a wireless, electronic measuring device for rail vehicle doors and sliding steps. The closing force measuring device is a further development of the tried and tested BIA 600 measuring device.

- Measuring range: 0 ... 700 N
- Accuracy: +/- 3 N (0-100 N), +/- 3 % (>100 N)
- User guidance and evaluation according to EN 14752:2015,
   EN 14752:2005 (optional)
- Interface: Bluetooth
- App downloadable from Google Play Store
- incl. ISO calibration certificate

The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular inspections.

- Measuring range: 0 ... 2000 N
- Stiffness: 500 N/mm
- Accuracy: +/- 3N or 3% of reading
- Wireless
- App Force Meter available for download
- PC evaluation software PinchPilot
User guidance and evaluation according to:
- ASR 1.7
- DIN EN 12453:2017
- DIN EN 16005:2012
- DIN 18650-1:2010
- DHF-TS-011:2018
- 2006/42/EC Machinery Directive
- incl. ISO calibration certificate

The BIA-1 BT closing force transducer is a wireless, electronic closing force measuring device for rail vehicle and bus doors and sliding steps. The closing force transducer is a further development of the tried and tested closing force measuring device Original BIA Class 1.

- Measuring range: 25 ... 310 N
- Stiffness: 10 N/mm
- Accuracy: +/- 3N or 3% of reading
- PC evaluation software PinchPilot
- Force Meter App (downloadable from Google Play Store)
-Wireless
Norms:
-EN14752:2005
- VDV 111
- VDV 157
- 2001/85/EC
- § 35 E, paragraph 5 StVZO
- ISO calibration certificate

- Measuring range: 0 ... 750 N
- Stiffness: 25 N/mm
- Accuracy: +/- 3N or 3% of reading
- Memory for 100 measurements
- App downloadable in Google Play Store
- Bluetooth interface
- Wireless
- Standards - EN 81-1, EN 81-2, EN 81-20:2014, EN 81-50:2015, EN 14120
- incl. ISO calibration certificate

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)

With this coating thickness gauge, layer thicknesses on metallic surfaces can be reliably determined. The coating thickness gauge has a measuring range of 1500 µm. This means that the coating thickness gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

The color meter is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the color meter.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
- Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources

The colorimeter is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the colorimeter.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
- Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources

The concrete moisture meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the concrete moisture meter. This guarantees a non-destructive measurement with the concrete moisture meter. The concrete moisture meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

- Measuring range: 0.0 ... 100.0%
- Resolution: 0.1%
- Measuring depth: 20 ... 40 mm / 0.78 ... 1.57"
- Interface: Bluetooth 4.0
- Free Android and iOS app

- Measuring range: 10 ... 100 N/mm² / 1500 ... 8500 PSI (lbs / in²)
- Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
- Digital Display of results
- USB interface for connection to a PC
- Data storage
- Rechargeable battery

- Infrared measuring range: -40 ... 300°C / -40 ... 572°F
- Sensor measuring range: -40 ... 300°C / -40 ... 572°F
- Charging station with micro USB cable
- Bluetooth interface