Digital Thermometer PCE-CMM 5
£ 159.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer PCE-CMM 5 measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.

- Large CO2 measuring range up to 5000 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- 5 h graph for long-term monitoring
- Battery and power adapter operation
- Suitable for classrooms, nurseries/kindergartens, lecture halls
Digital Thermometer PCE-CMM 8
£ 165.00
Price excl. VAT &. delivery
2 year Warranty
With the digital thermometer you can ensure the right climate in your office. The digital thermometer measures the CO2 content of the air, the relative humidity and the room temperature. The digital thermometer shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls
Digital Thermometer PCE-COG 10
£ 256.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the digital thermometer also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery
Digital Thermometer PCE-FWS 20N
£ 133.00
Price excl. VAT &. delivery
2 year Warranty

This digital thermometer with outside sensor is a real all-rounder. The wireless digital thermometer with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless digital thermometer and outside sensors. The weather data of the digital thermometer with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Digital Thermometer PCE-PTH 10
£ 27.00
Price excl. VAT &. delivery
2 year Warranty
The digital thermometer is a measuring device for orienting measurement of temperature and relative humidity. With a temperature measuring range of -10 ... 50 °C and a humidity measuring range of 20 ... 90% RH the digital thermometer covers a wide range of tasks.

- Measuring range temperature: -10 ... 50 °C / 14 ... 122 °F
- Measuring range humidity: 20 ... 90% RH
- Selectable units
- Various measuring functions
Durometer PCE-HT-75
£ 573.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


- Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
- Measuring range: 10 ... 70 N/mm²
- Energy: 0.735 J / 0.54 ft-lbs
- Low strength concrete testing or Type L
- Indication of measurement: 0 to 100 (without dimensions)
- Maximum thickness of concrete (of the material): 70 cm

Dust Monitor PCE-CPC 100
£ 4,138.00
Price excl. VAT &. delivery
2 year Warranty
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either number per 28.3 litres or number per cubic metre. Air sampling from the dust monitor is done by an internal pump.

Real-time measurement from 0.3 μm ... 10 μm
Output in particles/28.3L or particles/m³
- Visual and audible alarm
  when threshold value is exceeded
- Modbus RTU and MQTT via RS485
- Temperature and humidity measurement
Real-time display of clean room class
  ISO 14644-1
Dust Monitor PCE-CPC 50
£ 1,682.00
Price excl. VAT &. delivery
2 year Warranty
The state-of-the-art dust monitor enables precise real-time measurement in the range of 0.3 μm to 10 μm to provide a comprehensive picture of air quality. The results are presented in two units, either in number per m³, number per litre or number per 28.3l. Air sampling from the dust monitor is performed by an internal pump.

- Particle concentration:  0.3  ... 10 μm
- Particle measurement channel sizes: 
  0.3, 0.5, 1.0, 2.5, 5.0, 10 µm
- Output in particles/m³, 
  particles/l or particles/28.3L
- Modbus RTU and MQTT via RS485
- Analogue output 4 . .. 20 mA
Dust Monitor PCE-PCO 1
£ 837.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-PCO 1 is a handheld laser dust monitor, or dust measuring device, for measuring the concentration of particles in the air. The dust monitor:


- Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Offers a robust 80 MB internal memory and microSD card slot
- Features a large, full-color LCD display with backlight
- Includes a built-in camera for image and video recording
- Contains sensors for measuring air temperature, dew point and relative humidity
- Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

Electric Vehicle EVSE Tester PCE-EVSE 300
£ 290.00
Price excl. VAT &. delivery
2 year Warranty
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special electric vehicle EV tester are required to check the function, the protective devices and the insulation.

- CP and PP simulation
- Direct connection for wallboxes
- Adapter with charging plugs Type 1 and Type 2
- CP simulation (communication line) A, B, C, D, error
Electric Vehicle EVSE Tester PCE-EVSE 310
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

PE pre-test
- Proximity Pilot PP / Control Pilot CP
- Simulation CP fault "E" / PE fault
- Mains socket for measuring purposes
- Safety measuring sockets
Optional adapter to type 1
Electric Vehicle EVSE Tester PCE-EVSE 310+
£ 325.00
Price excl. VAT &. delivery
2 year Warranty
The electric vehicle EVSE tester is  for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.  

- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets
incl. type 2 plug and adapter to type 1
Electrical Tester PCE-PA 8000
£ 1,624.00
Price excl. VAT &. delivery
2 year Warranty

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

- True RMS measurement for ACA, ACV
- True power: W, KW, MW
- VA, KVA, MVA, VAR, KVAR, MVAR
- PF (power factor), phase angle (Φ)
- KWH, KVAH, KVARH, PFH
- Voltage measurement range: 10 ... 600 ACV
- Current measurement range: 0.2 ... 1200 ACA
- Real-time current, voltage and power consumption measurement
- Built-in data recorder with adjustable sample rate: 2 ... 7,200 sec.

Environmental Meter PCE-322A
£ 169.00
Price excl. VAT &. delivery
2 year Warranty

The environmental meter is a handheld, portable, professional Class II sound level meter or decibel (dB) meter with built-in data-logging or data-recording functionality for environmental testing. Thus, the environmental meter is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.


- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option

Environmental Meter PCE-322ALEQ
£ 397.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ environmental meter has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Environmental Meter PCE-AQD 50
£ 351.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The environmental meter is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
Environmental Meter PCE-CMM 5
£ 159.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter PCE-CMM 5 measures the CO2 content in the air and shows the measured value on a large LCD display. The CO2 content in the air is an important measure for checking the ventilation behavior in offices, classrooms, lecture halls, etc.

- Large CO2 measuring range up to 5000 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- 5 h graph for long-term monitoring
- Battery and power adapter operation
- Suitable for classrooms, nurseries/kindergartens, lecture halls
Environmental Meter PCE-CMM 8
£ 165.00
Price excl. VAT &. delivery
2 year Warranty
With the environmental meter you can ensure the right climate in your office. The environmental meter measures the CO2 content of the air, the relative humidity and the room temperature. The environmental meter shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls