Order no.: PCE-WSAC 50W 230-ICA

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 atmospheric pressure meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the atmospheric pressure meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000-ICA

The PCE-CT 5000 Automotive Tester is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Automotive Tester goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 80
The paint layer automotive tester PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals.

- Measuring range: Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many materials such as:
- Iron
- Steel
- Aluminum
- Copper
- Brass
- Stainless steel
- Incl. ISO laboratory calibration with certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 90
The automotive tester is a versatile measuring device. This is made possible by the various optional sensors on the automotive tester. Thanks to the surface temperature sensor, the automotive tester can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 60 mm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LES 100-ICA

The PCE-LES 100-ICA automotive tester combines LED technology with compact and accurate electronics, which controls the sequence and timing of flash over the entire measuring range. Thanks to LED technology, the automotive tester does not need periodic changing of bulbs. The automotive tester is sent to you calibrated (by the manufacturer PCE Instruments).


- Range: 60 ... 99,990 r.p.m / 1 ... 1,666 Hz
- 2 bright LEDs (1400 lux @ 50 cm)
- Display: 5 digits LCD
- Impulses/Flash: Possibility of duplication and division/fine tuning
- Offset: Yes, 360º

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-OM 15-ICA

PCE-OM 15-ICA is an automotive tester with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate.


- Measuring range: 50 ... 30000 rpm
- Bright 6500K xenon light bulb
- 10 mm / 0.4 in 5-digit LCD
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 pressure gauge is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the pressure gauge is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The calibrator data logger PCE-MCA 50 is intended for calibration and maintenance. This calibrator data logger PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the calibrator data logger PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCA 50-ICA
The calibrator PCE-MCA 50 is intended for calibration and maintenance. This calibrator PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the calibrator PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 27FN-ICA

PCE-CT 27FN is a Car Measuring Device that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 1250 µm / 0 ... 50 mils
- Accuracy of ± (2% + 2 µm) / ± (2% + 0.1 mils)
- Features a resolution of 0.1 µ / 0.1 mils
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DSX 20-ICA
The car measuring device PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This car measuring device has a small design and has a low weight. Thus, the car measuring device can be conveniently used even in measurements in hard to reach places.

Function
- Speed: 50 ... 35000 RPM / FPM
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- With trigger input
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 6-ICA
The car measuring device PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA car measuring device is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-360-ICA

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Voltage range: 50.0 V ... 600.0 V True RMS value
- Current range: 3.0 A ... 999.9 A True RMS value
- Includes clamps, clips, leads, PC software and data cable
- Data logger of 10,000,000 records at 5/10/30/60/120 second interval options
- For measurement in real time and over an extended time period up to 578 days @ 5 second sample rate
incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 3-ICA
The PCE-CM 3 clamp meter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 clamp meter is plugged over the live conductor. The clamp meter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CM 40-ICA
The flexible digital clamp meter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible clamp meter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 41-ICA

The Clamp Meter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital clamp meter, or you can use the integrated clamp mechanism. By using the clamp of the digital clamp meter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC3-ICA

Clamp Meter to determine indirectly, the AC/DC currents with high accuracy.


- AC current (50 / 60 Hz): 2 A  / 1-mA / ± 2.8% + 10 dgt
- DC current: 2 A / 1-mA / ± 3.0% + 10 dgt
- AC overload protection: 100V AC up to 600V AC 50 / 60 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer