Color Meter PCE-CSM 4
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty

This color meter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The color meter simulates to see surfaces like with human eyes.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Colorimeter PCE-CSM 4
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Electrical Tester 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Force Gage PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gage PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gage PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gage consists of a hand-held measuring device and an external torque transducer. The force gage is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gauge PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gauge PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Force Gauge PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gauge consists of a hand-held measuring device and an external torque transducer. The force gauge is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
HVAC Meter 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The HVAC meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Paint Testing Equipment PCE-CSM 4
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty

This paint testing song is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The paint testing equipment simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The paint testing equipment is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Portable Power Analyzer 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The portable power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Power Analyzer 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The power analyzer is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Power Meter 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The power meter is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The power meter has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

- Power range: 0.1 ... 5000 W
- Current range: 0.001 ... 20 A AC
- Frequency, power factor, energy
- Accuracy: ±(0.4% of reading + 0.1)
- 2 input channels
- Color display
incl. ISO-Calibration Certificate
Spectrophotometer PCE-CSM 4
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty

This Spectrophotometer is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The Spectrophotometer simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Designed specifically for the food industry
- Software included

 

Surface Testing - Colorimeter PCE-CSM 4
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. 

- Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
- Rechargeable lithium-ion battery
- Auto white black calibration
- Stable performance
- Measurement of different colors
- Application for many surfaces
- Simple user interface
- Software included

 

Torque Meter PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Torque Meter PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque meter is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)