2 year Warranty
The panel meter is a precision instrument of the highest standards. The panel meter is specifically designed for process monitoring and calibration. This panel meter is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.
- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).
- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.
- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
The manometer has a two-line display. The manometer can represent pressures up to 600 bar, relative or absolute. The parts of the manometer that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).
- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
The panel meter has a two-line display. The panel meter can represent pressures up to 600 bar, relative or absolute. The parts of the panel meter that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
The pressure sensor has a two-line display. The pressure sensor can represent pressures up to 600 bar, relative or absolute. The parts of the pressure sensor that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.
- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm