Scale with Software (Optional) PCE-SD 6000F SST
£ 5,923.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The stainless steel scale with software is installed in the floor to obtain a flat surface. This allows the stainless steel scale with software to be easily loaded with all kinds of conveyors.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Scale with Software (Optional) PCE-SD 3000F SST
£ 5,187.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The scale with software is installed in the floor to obtain a flat surface. This allows the scale with software to be easily loaded with all kinds of conveyors.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Scale with Software (Optional) PCE-SD 1500F SST
£ 5,126.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The scale with software is installed in the floor to obtain a flat surface. This allows the scale with software to be easily loaded with all kinds of conveyors.

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III
Scale with Software (Optional) PCE-SD 6000F
£ 3,826.00
Price excl. VAT &. delivery
2 year Warranty
The verifiable built-in scale with software of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in scale with software is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 6000 kg
- Readability : 2 kg
- Calibration included
- Calibratable M III
Scale with Software (Optional) PCE-SD 3000F
£ 3,203.00
Price excl. VAT &. delivery
2 year Warranty
The verifiable built-in scale with software of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in scale with software is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Scale with Software (Optional) PCE-SD 1500F
£ 3,112.00
Price excl. VAT &. delivery
2 year Warranty
The verifiable built-in scale with software of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in scale with software is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 1500 kg
- Readability : 0.5 kg
- Calibration included
- Calibratable M III
Portable Ultrasonic Flow Meter PCE-TDS 200+ M-SW-KIT incl. software
£ 2,728.00
Price excl. VAT &. delivery
2 year Warranty
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the
Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
- Sensor for pipe diameters
  DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Ultrasonic Flow Meter PCE-TDS 200+ M-SW-KIT incl. software
£ 2,728.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- Temperature measurement up to 1800 °C
- for different media
- for different pipe materials
- Measuring parameters: flow velocity,
  volume flow, volume
  temperature, heat output and heat quantity
- Interface: USB
- Cost display
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Portable Ultrasonic Flow Meter PCE-TDS 200 M-SW-KIT incl. software
£ 1,780.00
Price excl. VAT &. delivery
2 year Warranty
The Portable Ultrasonic Flow Meter has a measuring range of ±32 m/s. To perform flow measurement with the Portable Ultrasonic Flow Meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters:
  Flow velocity, flow rate and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Ultrasonic Flow Meter PCE-TDS 200 M-SW-KIT incl. software
£ 1,780.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the
ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after entering the pipe and medium specifications.

- Measuring range: ±32 m/s
- Resolution: 0.001 m/s
Pipe size: DN 50 ... 700 / 57 ... 720 mm
- Temperature resistance: -30 ... 160 °C
- for different media
- for different pipe materials
- Measuring parameters:
  Flow velocity, flow rate and volume
- Interface: USB
- Data logger: 10 million measuring points
- LiPo battery
incl. software
Scale with Software (Optional) PCE-SD 30CR
£ 1,308.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

The scale with software PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The scale with software features a standard RS-232 interface. In addition the scale with software PCE-SD CR series can be equipped with further interfaces.


- Weighing capacity: 30 kg
- Readability: 10 g
- Verifiable M III

 

Scale with Software (Optional) PCE-SD 60CR
£ 1,308.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The scale with software PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The scale with software features a standard RS-232 interface. In addition the scale with software PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 60 kg

- Readability: 20g
- Verifiable M III
Scale with Software (Optional) PCE-SD 150CR
£ 1,308.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The scale with software PCE-SD CR series finds its application both in many production areas as well as in shipping areas. The scale with software features a standard RS-232 interface. In addition the scale with software PCE-SD CR series can be equipped with further interfaces.

- Weighing capacity: 150 kg

- Readability: 50g
- Verifiable M III
Scale with Software (Optional) PCE-SD 300SST C
£ 1,334.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
Verifiable waterproof scale with software in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).

- Weighing capacity: 300 kg
- Readability: 100g
- Calibration value: 100 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Scale with Software (Optional) PCE-SD 150SST C
£ 1,282.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

Verifiable waterproof scale with software in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 150 kg
- Readability: 50 g
- Calibration value: 50 g
- Weighing surface: 600 x 500 mm
- Verifiable M III

 

Scale with Software (Optional) PCE-SD 60SST C
£ 1,086.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment

Verifiable waterproof scale with software in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 60 kg
- Readability: 20 g
- Calibration value: 20 g
- Weighing surface: 500 x 400 mm
- Verifiable M III

 

Scale with Software (Optional) PCE-SD 30SST C
£ 1,086.00
Price excl. VAT &. delivery
2 year Warranty

Verifiable waterproof Scale with Software in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).


- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III

 

Tension Dynamometer PCE-MTS500-DFG N 5K FD 300 KIT incl. Force Test Stand
£ 3,226.00
Price excl. VAT &. delivery
2 year Warranty
Our motorized force test stand can be coupled and operated in a wide variety of versions with our force gauges / tension dynamometers. The motorized force test stand lets you carry out almost all of your compression and tensile force applications with repeatability. The use of the motorized force test stand offers the operator the most precise equality of test bench and sample.

- Force range: max. 5000 N / 500 kg / 1100 lbs
- Travel: max. 300 mm / 11.8"
- Feed speed: 30 ... 230 mm/min / 1.18 ... 9.05 in/min
- Manual or automatic procedure
- incl. length measuring device: -150 … 150 mm / -5.9 … 5.9"
- incl. software
- incl. force gauge PCE-DFG N 5K (0 ... 5000 N)

*** N.B. The mounting plate ADP-UNI accessory must be ordered for internal load cell force gauges ***