With the IoT sensor it is possible to carry out quick and precise analysis of the pH concentration of liquid samples. For example, with the IoT sensor it is possible to check alkaline solutions, water, wine, milk and many other liquids for the pH content.

- pH measuring range: -2.000 ... +19.999 pH
- Resolution: 0.1 / 0.01 pH
- Measuring range mV: -1999.9 ... +1999.9 mV
- Resolution: 1 mV
- Temperature measuring range: -10 ... +110 °C / 14 ... 230 °F
- Resolution: 0.1 °C
- USB and Bluetooth interface
- Memory for 300 measured values
- Live viewing software
- 3 point calibration
- incl. ISO Calibration Certificate

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Relay output and control output
- Handle and wall holder
- Analog output signal
- Incl. ISO calibration

With the Temperature Sensor PCE-IR 50-ICA, surface temperatures can measured quickly and easily. The measuring range of the temperature sensor is 0 ... 500 °C / 32 ... 932 °F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the temperature sensor can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500 °C / 32 ... 932 °F
- Accuracy: ± 1.5 °C or ± 1 %
- Optical resolution: 15:1
- Output signal: 4 ... 20-mA standard signal
- For fixed installation (mounting bracket incl.)
- incl. ISO Calibration Certificate

The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the sound sensor is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

The sound sensor consists of a measuring microphone with a handle and a wall bracket on a 1.5 m (4.9 ft) cable, a sound transmitter. The main area of ​​application of the sound sensor is in the continuous sound measurement and sound monitoring of factory halls, production rooms and at large events (night clubs, public festivals, kart tracks ...).

- Measuring range: 30 ... 130 dB in three ranges
- Resolution: 0.1 dB
- Power supply: 24 V DC
- Relay output and control output
- Handle and wall bracket
- Analog output signal
- incl. ISO Calibration Certificate

The compact pressure sensor is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure sensor is ideal for mobile applications, such as test beds.

- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5

With the temperature sensor PCE-IR 50, surface temperatures can measured quickly and easily. The measuring range of the temperature sensor is 0 ...500 °C / 32 ... 932°F. The measured temperature is output as a 4 ... 20-mA standard signal which means that the temperature sensor can be easily integrated into different monitoring systems, including those in different production processes or food storage as well as the monitoring of electronic systems.

- Measurement range: 0 ... 500°C / 32 ... 932°F
- Accuracy: ± 1.5°C or ± 1%
- Optical resolution: 15:1
- Output signal: 4 ... 20-mA standard signal
- For fixed installation (mounting bracket incl.)

- 75 mm / 3 in digit height
- 30 ... 130 dBA measuring range
- 0.1 dB or 1 dB resolution
- For offices, schools, event rooms
- Memory for 657,000 readings

The IoT sensor measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the IoT sensor, the measured values can be sent in real time to a PC and analyzed with the included software.

- Α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- Software Included

 

The PCE-VM 31-WB Condition Monitoring Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see   
  accessories)

 

- Pipe diameter: DN 50 ... 700 / 57 ... 720 mm / 1.9 ... 27.5 / 2.2 ... 28.3"
- Temperature resistance: -30 ... 160 °C / -22 ... 320 °F

- Important! If you order the sensor at a later date, we require the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!

Medium-sized sensor pair for pipe diameters DN 15 ... 100 / 20 ... 108 mm. Suitable for flow measurement on medium-sized pipes. The sensors of the ultrasonic flow meter can be attached to ferrous pipes with the built-in magnets. Alternatively, the sensors can be mounted to the pipe with detachable cable ties. The temperature resistance is between -30 ... 160 °C.

- Pipe diameter: DN 15 ... 100 / 20 ... 108 mm / 0.6 ... 3.9 / 0.7 ... 4.2"
- Temperature resistance: from -30 ... 160 °C / -22 ... 320 °F
- Dimension: 45 x 30 x 30 mm / 1.7 x 1.1 x 1.1"

- Important! If you order the sensor later, we need the PCE-TDS 200 hand-held unit,
   in order to match the sensor to the hand-held unit!

The PCE-VM 31-HA Condition Monitoring Human Vibration Meter is designed for measuring human vibration at the workplace. The Condition Monitoring Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.

- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:

The simple pressure sensor PCE-PS 420 can be used everywhere where simple pressure is to be measured. The measured pressure is provided as a 4 ... 20 mA analog value on the pressure sensor.

- Max. 400 Bar (selectable)
- 4 ... 20 mA output
- Media: non-corrosive gases and liquids
- Pressure: relative
- Diaphragm: Ceramics
- Accuracy class: 1

 

- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values

The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor it is possible, for example, to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- Adjustable units: mg/l, ppm
- Light detector: photodiode
Parameters:
- pH
- Alkalinity
- Calcium hardness
- Total hardness