- Accuracy class 1
- GPS function
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Class 1 sound calibrator (for verification only)

The microprocessor thermometer is a highly accurate 1-channel temperature measuring device. The microprocessor thermometer is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

- Measuring range: -100 ... +400 °C / -148 ... 752 °F
- Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 ... 82.4 °F) device only
- Resolution: 0.01 °C / 0.018 °F
- PT-100 sensor

- Accuracy class 1
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. class 1 sound calibrator (for verification only)

Climate Meter with 4 ... 20 mA output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental meter with 4 ... 20 mA output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Weather station with 4 ... 20 mA output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Wind measurer with 4 ... 20 mA output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Data logger with internal memory and software.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

 

Geiger Counter with internal memory and software. This Geiger Muller meter has been usually used in nuclear power plants. Everyday it is most commonly used in the control and radiation testing of imported goods (steel, wood) from critical areas, as well as to measure the food which has been previously irradiated. This Geiger Counter can be also used to measure natural radioactive radiation as the one which appears near lakes.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

Radiation detector with internal memory and software.

- Measurement ranges: 0.01 µSv/h - 1000 µSv/h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

 

Radioactivity meter with internal memory and software.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

 

Compact air flow meter for weather monitoring. Basic air flow meter with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 360°
- Output signal: 4 ... 20 mA
- Assembly: pipe assembly / assembly via PG screw connection
- Heating: yes

Compact air flow meter for weather monitoring. Basic air flow meter with 4 … 20 mA output. Measurement of the horizontal wind direction with an analogue output signal. The wind vane is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 360°
- Output signal: 4 ... 20 mA
- Assembly: pipe assembly / assembly via PG screw connection
- Heating: yes

The multifunction pH meter PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable multifunction pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

Anemometer with 4 ... 20 mA output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes

Environmental tester with 4 ... 20 mA output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes