2 year Warranty
Gas Leak Detector AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Gas Leak Detector can be equipped with four different heads that vary in their measurement range.
- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger
Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!
Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO2), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).
- Stationary
- For Carbon Dioxide CO2
- Additional display and alarm station
- ATEX approved
Ozone Meter AQ-500 is a highly accurate instrument for measuring ozone concentrations in the air. The Ozone Meter can be equipped with four different heads that vary in their measurement range.
- High accuracy and functionality
- Battery operation
- Alarm function
- Data logger
Attention! No sensor head is included in the delivery, it must be ordered separately as an accessory!
Verifiable waterproof benchtop scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III
Verifiable waterproof benchtop scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 60 kg
- Readability: 20 g
- Calibration value: 20 g
- Weighing surface: 500 x 400 mm
- Verifiable M III
Verifiable waterproof compact balance in stainless steel with separate indicator (no corrosion). The multifunctional compact calance is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III
Verifiable waterproof Compact Balance in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 60 kg
- Readability: 20 g
- Calibration value: 20 g
- Weighing surface: 500 x 400 mm
- Verifiable M III
Verifiable waterproof counting scales in stainless steel with separate indicator (no corrosion). The counting scales are manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
Verifiable waterproof counting scales in stainless steel with separate indicator (no corrosion). The counting scales are manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
PCE-950 is a handheld metal hardness durometer used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
PCE-950 is a handheld material hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
PCE-950 is a handheld metal hardness tester used to determine the hardness of 10 different types of metal (i.e., cast steel, hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy) according to the Leeb rebound method. In addition to Leeb hardness units, the metal hardness tester displays hardness measurements in Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers and Shore hardness units.
- Measurement ranges: 19.8-68.5 HRC / 13.5-101.7 HRB / 59.1-85.8 HRA / 19-655 HB / 80-976 HV / 32.2-115 HS
- Hardness units: HL, HRC, HRB, HRA, HB, HV, HS
- Accuracy: ± 2% / Repeatability: ± 2%
- Impact device: Type D (integrated)
- Data Analysis Software
- For use with hammered steel, cold-rolled steel, stainless steel, cast iron, ductile iron, aluminum alloy, brass, bronze and forged copper alloy metals
Verifiable waterproof industrial scale in stainless steel with separate indicator (no corrosion). The industrial scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth).
- Weighing capacity: 30 kg
- Readability: 10 g
- Calibration value: 10 g
- Weighing surface: 400 x 500 mm
- Verifiable M III