Industrial Measurement Products and Solutions
Order no.: PCE-PWT 10

The conductivity meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z transmitter is used to convert a measured current into a standard signal. This makes it possible to determine the most diverse currents with the transmitter.

- Input: Alternating current
- Various supply voltages
- For direct or indirect current measurement
- Current transformer can be connected
- With voltage output or current output

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05

PCE-P05 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05

PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- 0.001 to 0.137 bar (0.001 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05

PCE-P05 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- 0.001 to 0.344 bar (0.001 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01

PCE-P01 is a portable handheld digital pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.137 to 0.137 bar (-2.000 to 2.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P05

PCE-P05 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P05 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- -0.344 to 0.344 bar (-5.000 to 5.000 psi) measuring range
- 11 measurement units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar
- Features real-time data-logging capabilities using the included PC software and USB cable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PWT 10

The salt meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0.00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P20Z

The PCE-P20Z measuring transducer measures voltages up to 600 V AC and converts this into a standard signal. Depending on the design, the PCE-P20U-I transducer can measure voltages up to 250 V AC, 400 V AC or 600 V AC and outputs a 4 ... 20 mA standard signal. Depending on the model, the supply voltage of the transducers is either 85 ... 253 V AC / DC or 20 ... 40 V AC / DC.

- RMS Measurement of voltages up to 600 V AC
- Input: AC voltage
- Output: 4 ... 20 mA or 0 ... 10 V Standard signal
- Various supply voltages

Note: This item must be configured before ordering!

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PWT 10

The water analysis meter PCE-PWT 10 is a good solution for anyone who wants to check the conductivity of ultrapure water and to accurately determine the salinity of liquids. 

- conductivity: 0 ... 20 µS/cm ...
- salinity: 0,00 ... 10.00 ppt
- temperature: 0 ... 60 °C / 32 ... 140 °F
- automatic temperature compensation
- internal 3-point calibration

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: GMSD 2 BA

Absolute pressure sensor GMSD 2 BA. Suitable for air and non-corrosive and non-ionizing gases and liquids. Suitable for GMH 3111/3151.


- Measuring range: 0 ... 2000 mbar abs. / 0 ... 29 psi abs.
- Overload: max. 4 bar abs
- Resolution: 1 mbar

 

Manufacturer: GHM Messtechnik GmbH
Test Instruments manufacturer
Order no.: PCE-HFX 100
The air humidity meter PCE-HFX 100 is specially designed for monitoring indoor ventilation. We all know how the importance of the indoor climate in the workplace, in schools, kindergartens etc. The performance of an individual depends on the air quality at the workplace.

Measuring function
- Formaldehyde HCHO: 0 ... 2 mg/m³
- Temperature: -10 ... 50°C / 14 ... 122°F
- Humidity: 0 ... 99% r.H.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HFX 100
The air quality meter PCE-HFX 100 is specially designed for monitoring indoor ventilation. We all know how the importance of the indoor climate in the workplace, in schools, kindergartens etc. The performance of an individual depends on the air quality at the workplace.

Measuring function
- Formaldehyde HCHO: 0 ... 2 mg/m³
- Temperature: -10 ... 50°C / 14 ... 122°F
- Humidity: 0 ... 99% r.H.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BS 3000

The Analytical Balance PCE-BS 3000 is a light, rugged precision balance suitable for different purposes. The removable stainless steel pan allows the laboratory balance to be cleaned easily. The Analytical Balance PCE-BS 3000 can be used for weighing as well as for piece counting.


- Weighing capacity: Max. 3000 g
- Readability (g): 0.1
- Repeatability (g): 0.1
- Calibratable

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 25

The PCE-CT 25 Automotive Tester is used for quickly detecting the thickness of metals, such as steel and iron (F) as well as non-ferrous metals (N) in the automotive sector. The PCE-CT 25 Automotive Tester is used to detect damages in cars (the coating thickness of paint can say if the car has suffered any damage) to establish if the car has been in an accident and the resulting value of the car in the used car market.


- Measurement range: 0 µm ... 1000 µm / 40 mils
- Resolution: 0.1 mils / 1 µm
- Display: 3 1/2 digit LCD display
- Operating conditions: 0 ... 50°C / 32 ... 122°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N16O
The built-in display is an adjustable gauge to visualize pulses from speed sensors. This built-in display is able to display the pulses per revolution.

- Display range: 0 ... 999999
- Input range: 0.1 Hz ... 1 kHz
- Display range revolutions 6 ... 60000 RPM
- 6-digit LED display
- Display of the pulses per revolution
- Adjustable divider via buttons
Catalogue: Control Systems
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 12
The cable detector is a versatile measuring instrument. In addition to the standard voltage and current measurements, the cable detector also has a network analysis. With this network analysis, the cable detector can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test
Manufacturer: PCE Instruments
Test Instruments manufacturer