Industrial Measurement Products and Solutions
Order no.: Xgard-1-O2

The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 661.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The accelerometer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This accelerometer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer automotive tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the calibrator to be used to set process displays, data loggers, paperless recorders, etc. The calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer coating thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The condition monitoring vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This condition monitoring vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The current calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current calibrator to be used to set process displays, data loggers, paperless recorders, etc. The current calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The HVAC meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This HVAC meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer material tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and sensors available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer paint gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Incl. ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The process calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the process calibrator to be used to set process displays, data loggers, paperless recorders, etc.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer surface tester PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
- Incl. ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer thickness meter PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The vibration analyzer is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration analyzer shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VT 3700-ICA
The vibration meter is ideal for maintenance workers to quickly check vibrating parts, machines and systems. This vibration meter shows the vibration acceleration, vibration velocity and vibration displacement directly on the display. The measurement unit can be switched between the metric system and imperial units.

Measuring ranges
- Acceleration: 0.0 - 399.9 m/s² / 0.0 - 15744 in/s²
- Velocity: 0.00 - 399.99 mm/s / 0.00 - 15.74 in/s
- Displacement: 0.000 - 3.9 mm / 0.000 - 0.154 in
- Automatic ISO 10816-3 evaluation
- Colored graphic display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LOC 20
The voltage calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the voltage calibrator to be used to set process displays, data loggers, paperless recorders, etc. The voltage calibrator PCE-LOC 20 can be purchased here in our online shop.

- Simultaneous simulation and measurement mode
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: Xgard-1-O2

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O2, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O2, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

Manufacturer: Crowcon Detection Instruments Ltd.
£ 661.00

Price excl. VAT &. delivery
2 year Warranty