Force Gauge PCE-N50F
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The force gauge is suitable for panel mounting. This force gauge can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force gauge.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Force Indicator PCE-N50F
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The force indicator is suitable for panel mounting. This force indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the force indicator.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Indicator PCE-N50F
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The indicator is suitable for panel mounting. This indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the indicator.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Material Tester PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The material tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Material Thickness Meter PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The material thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the material thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Paint Gauge PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The paint gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Paint Thickness Tester PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Panel Meter PCE-N50F
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The panel meter is suitable for panel mounting. This panel meter can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the panel meter.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Surface Tester PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The surface tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the surface tester, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Thickness Gauge PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The thickness gauge is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness gauge, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Thickness Meter PCE-CT 80-FN0D5
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The thickness meter is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the thickness meter, measuring points that are difficult to access can also be easily reached.

- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm
- Accuracy after foil calibration: ±(1% of reading + 1 µm)
- For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
- Diameter: 17mm / 0.67"
Weight Indicator PCE-N50F
£ 610.00
Price excl. VAT &. delivery
2 year Warranty
The weight indicator is suitable for panel mounting. This weight indicator can be used to indicate the weight, force or torque. The decisive factor here is the type of sensor that is connected to the weight indicator.

- Signal input range: 0 ... 20 mV
- Units: g, mN, mlb, Pa, kg, N, Ib, kPa, t, kN, klb, MPa
- For load cells, force sensors, etc.
- Up to 1600 Hz sampling rate
- LCD display
Benchtop Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The benchtop scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Compact Balance PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The compact balance is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Counting Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The counting scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Inventory Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The inventory scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
LAB Scale PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The LAB scale is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate
Laboratory Balance PCE-DPS 25-ICA incl. ISO Calibration Certificate
£ 608.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The laboratory balance is a balance with two integrated weighing platforms in one measuring device. These are two different weighing platforms with different specifications.

- Platform 1 measuring range: 25 kg / 55 lbs
- Platform 2 measuring range: 1 kg / 2.2 lbs
- Two integrated weighing surfaces
- Piece counting function
- Different interfaces
- Connection of another load cell possible
- incl. ISO Calibration Certificate