PCE-IR 100 is both a infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade condition monitoring thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.
- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning
PCE-IR 100 is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.
- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning
PCE-IR 100 is both an infrared non-contact thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.
- Infrared temperature range: -33 ... 220ºC / -27 ... 428ºF
- Probe temperature range: -55 ... 330ºC / -67 ... 626ºF
- Resolution: 0.2ºC / 0.36ºF
- IP 65 ingress protection rating allows hygienic cleaning
PCE-IR 100 is both an infrared thermometer for measuring surface temperature and a contact thermometer with probe for measuring core temperature of food. This food-grade thermometer allows for quick and easy testing of food surface temperatures without contamination using the infrared sensor, while also offering the possibility of testing food internal temperatures using the food-quality sensor probe.
- Infrared temperature range: -33 ... 220 ºC / -27 ... 428 ºF
- Probe temperature range: -55 ... 330 ºC / -67 ... 626 ºF
- Resolution: 0.2 ºC / 0.36 ºF
- IP 65 ingress protection rating allows hygienic cleaning
The digital panel indicator PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable on the digital panel meter PCE-N24H.
- IP 65 in the front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Configuration via software
The panel indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.
- For Pt100 sensor or thermal element
- Diameter: 96 x 48 x 64 mm
- Measurement speed: > 0.5 sec.
The voltage indicator PCE-N24H is designed to measure and display direct current and DC voltages. The option of arbitrary scaling of the input signal allows multiple applications of the digital panel meter PCE-N24H. Due to a large 4-digit LED the measured values are always clearly readable on the voltage indicator PCE-N24H.
- IP 65 in the front
- 100 V, 250 V, 400 V, 5 A DC (arbitrary)
- Configuration via software
The digital temperature indicator PCE-N24T is used for processing signals coming from temperature sensors. Depending on your specific needs, the digital indicator can be ordered with different inputs for thermocouples (type J, K) or resistance thermometers (Pt100). The input signal of the digital indicator is freely scalable, which increases its application possibilities.
- For Pt100 sensor or thermal element
- Diameter: 96 x 48 x 64 mm
- Measurement speed: > 0.5 sec.
The WTR 290 surface temperature sensor has been designed to measure surface temperature. Thanks to its small size (30 x 10 x 10 mm), the WTR 290 surface temperature sensor can be installed everywhere.
- Measuring range: - 50 °C ... 110 °C
- Stainless steel contact surface
- 2 -, 3 - or 4-wire Class A Pt100 sensor
The PCE-DD-A durometer is used to measure Shore A hardness in soft gums, rubber, elastomers and more. This compact pocket sized tester is ideal for checking / testing rubber hardness (tyre condition checker). Calibration is not available for this item.
- Measurement area: 0 ... 100 Shore A
PCE-DD-D is a Shore D durometer or hardness tester. This Shore D durometer uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.
- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade
The PCE-DD-A hardness tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.
- Measurement area: 0 ... 100 Shore A
PCE-DD-D is a Shore D durometer or hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24 in. Calibration is not available for this item.
- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade
PCE-DD-D is a Shore D durometer or material hardness tester. This Shore D hardness tester uses an impact rod with a 30º conical point and 50 Newtons (N) of force to make a surface indentation on material samples with a minimum thickness of 6 mm or 0.24". Calibration is not available for this item.
- For Shore D hardness testing of hard rubber, hard resin, acrylic, glass,
thermoplastic and more
- Measurement range: 0 ... 100 Shore D
- Accuracy: ± 2 Hardness - Grade
The PCE-DD-A material tester is used to measure Shore A hardness in soft gums, rubber, elastomers and more. Calibration is not available for this item.
- Measurement area: 0 ... 100 Shore A
The 2500 g Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.
- Measurement range: 2500 g
- Resolution: 20 g
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment
The 25 N Dynamometer is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.
- Measurement range: 25 N
- Resolution: 0.2 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment
The 2500 g Force Gauge is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.
- Measurement range: 2500 g
- Resolution: 20 g
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment
The 25 N Force Gauge is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, this corrosion-resistant anodized aluminum analog scale features a fatigue-resistant internal spring and requires no batteries.
- Measurement range: 25 N
- Resolution: 0.2 N
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment
The 2500 g Hanging Scale is a vertical hanging suspension hook for traction force measurement. Ideal for use in colleges, these corrosion-resistant anodized aluminum analog scales feature a fatigue-resistant internal spring and require no batteries.
- Measurement range: 2500 g
- Resolution: 20 g
- Accuracy: ± 0.3 % of load
- Tare and zero adjustment
