Order no.: PCE-LT 20
The PCE-LT 20 cable detector is used to determine the correct assignment of wire pairs in network cables. Furthermore, the cable detector can be used to locate lines and determine the connection between cables.

- Automatic / manual test of lancets
- Main and remote unit
- Testing of coaxial cables, single cores ...
- Cable location up to 50 cm depth
- For testing of analog telephone systems
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable fault meter PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable fault meter has many functions. For example, the cable fault meter can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 20
The PCE-LT 20 cable fault meter is used to determine the correct assignment of wire pairs in network cables. Furthermore, the cable fault meter can be used to locate lines and determine the connection between cables.

- Automatic / manual test of lancets
- Main and remote unit
- Testing of coaxial cables, single cores ...
- Cable location up to 50 cm depth
- For testing of analog telephone systems
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable locator PCE-186 CB consists of a transmitter and a receiver. The transmitter of the cable locator has many functions. For example, the cable locator can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LT 20
The PCE-LT 20 cable locator is used to determine the correct assignment of wire pairs in network cables. Furthermore, the cable locator can be used to locate lines and determine the connection between cables.

- Automatic / manual test of lancets
- Main and remote unit
- Testing of coaxial cables, single cores ...
- Cable location up to 50 cm depth
- For testing of analog telephone systems
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CBA 10

 

The Car Measuring Device PCE-CBA 10 can be used as a car battery tester. To test the battery, the car measuring device can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

 

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Koff-GR
Provides protection when transporting and storing the measuring instruments as well as their accessories.
Manufacturer: KKC cases GmbH
Test Instruments manufacturer
Order no.: PCE-DC 10
The clamp meter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a clamp meter must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The clamp on tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a clamp on tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI1

This Condition Monitoring Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The condition monitoring phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.


- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-S 40

The PCE-S 40 is a condition monitoring stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


- Measuring tip: approx. 16.5 cm
- Earpieces made of soft plastic
- Total length: approx. 1 m
- Tight ear clips

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The current clamp is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a current clamp must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The digital multimeter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a digital multimeter must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CBA 10

The Electrical Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the electrical tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DC 10
The electrical tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a electrical tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: GB-50-28-PCE-VE
- Guide ball 50mm for endoscope cable with camera head 28mm diameter
Test Instruments manufacturer
Order no.: PCE-DC 10
The HVAC meter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a HVAC meter must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MM 800

The PCE-MM 800 Inspection Camera is designed to display simple magnifications on a computer screen. For this purpose, the PCE-MM 800 inspection camera is connected to a screen. This allows a large presentation visible by several people. 


- 200 ... 1600-times magnification
- Bright LED lighting
- Maximum display: 1600 x 1200 pixels
- USB interface
- Digital zoom

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PI1

This Phase Rotation Meter PCE-PI1 has a robust housing with a large LCD display so you can easily and conveniently determine the phase and motor rotation direction. Furthermore, any problems in individual phases, are displayed on the phase rotation meter. The phase rotation meter meets the safety standard CAT III 600 V, IEC 61010.


- Easy operation
- No batteries required
- Robust alligator clips for easy connection
- 3-phase measurements of 40 ... 690 V AC
- Protection class IP 40

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-186 CB
The cable search device PCE-186 CB consists of a transmitter and a receiver. The transmitter of the line locator has many functions. For example, the line locator can be used to find wires in walls or break cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
Manufacturer: PCE Instruments
Test Instruments manufacturer