Weighbridge PCE-SD 600 SST
£ 4,491.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The weighbridge is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The weighbridge is made of solid corrosion and acid-resistant steel.

- Weighing range: 600 kg
- Readability: 0.2 kg
- Calibration included
- Verifiable M III
Weighing Platform PCE-SD 300 SST
£ 4,491.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibratable stainless steel weighing platform PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel weighing platform is made of solid corrosion and acid-resistant steel.

- Weighing range: 300 kg
- Readability: 0.1 kg
- Calibration included
- Verifiable M III
Weighing Platform PCE-SD 600 SST
£ 4,491.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The calibratable stainless steel weighing platform PCE-SD… SST is calibrated for its location of use according to calibration class III before delivery and is then approved for two years in all of Europe for the legal-for-trade movement of goods, calibration class III. The stainless steel weighing platform is made of solid corrosion and acid-resistant steel.

- Weighing range: 600 kg
- Readability: 0.2 kg
- Calibration included
- Verifiable M III
Accelerometer PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
Accelerometer / Vibration sensor is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The accelerometer / vibration sensor has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Gas Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Gas Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Material Tester PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
NDT Test Instruments PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT test instrument sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative NDT test instrument not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
NDT Tester PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Paint Viscosity Tester Viscolite d15
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small to large samples 10 ml / 10cc / 0.39 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.


- Uses resonant vibration to measure fluid viscosity
- Viscosity range: 0 ... 5,000 cP (mPa.S)
- Reproducibility is better than 1% 
- Small sample of only 10 cc required
- No moving parts to damage, easy cleanup, and virtually maintenance free 

 

Portable Viscometer Viscolite d15
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty

Viscolite d15 is a portable resonant or vibrational viscometer used in industrial and research applications to measure viscosity in very small to large samples 10 ml / 10cc / 0.39 oz and up. Featuring a built-in thermometer and a nearly maintenance-free design with no openly rotating parts, this handheld viscometer is delivered with one 316L stainless steel measuring probe and displays measurements in centipoise (cP). The energy loss measurement during vibration yields very high accuracy in very small vessels.


- Uses resonant vibration to measure fluid viscosity
- Viscosity range: 0 ... 5,000 cP (mPa.S)
- Reproducibility is better than 1% 
- Small sample of only 10 cc required
- No moving parts to damage, easy cleanup, and virtually maintenance free 

 

Ultrasonic Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Vibration Analyzer PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration analyzer is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration analyzer has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Meter PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration meter is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration meter has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Piezoelectric acceleration sensors
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- 4 channels for measurement
- Evaluation according to ISO 10816
Vibration Recorder PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration recorder is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration recorder has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
Acceleration: 0.001 ... 200 m/s²
Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816