Industrial Measurement Products and Solutions
Order no.: PCE-WL 1

The air flow meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the air flow meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The air flow meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The air velocity meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the flow meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The air velocity meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- battery life up to 3 years
- 512 MB microSD card incl.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The airflow meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use this kind of airflow test instruments for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. As a test instruments manufacturer, PCE Instruments adjust and calibrate all testing equipment.

- Measuring range: 0.8 ... 40 m/s
- Accuracy: ±0.5 m/s or 5 % of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The anemometer PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the anemometer for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The anemometer PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- battery life up to 3 years
- 512 MB microSD card incl.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 33N
In preventative maintenance, the high-resolution PCE-TC 33N digital thermometer is ideal for maintaining or repairing machinery or other equipment. The heart of the high-resolution digital thermometer PCE-TC 33N is an uncooled microbolometer (uncooled focal plane array) with a resolution of 220 x 160 pixels.

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2500N

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170 ... 960 HLD, 17.9 ... 69.5 HRC, 3.5 ... 101.7 HRB, HB 19 ... 683 HB,
   80 ... 1042 HV, 30.6 ... 102.6 HS, 59.1 ... 88 HRA

- Accuracy: ± 0.5 HLD
- Type D impact device
- Measuring principle: Rebound method

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDO 10

The PCE-DDO 10 shore durometer is an ergonomic device to check Shore hardness in gum. It has been designed with a high quality. The PCE-DDO 10 durometer is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The environmental meter PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the environmental meter for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The environmental meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl. 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The Environmental Tester PCE-WL 1 is an ideal tool to measure and store the wind speed for a long time. The battery enables you to use the wind recorder in situ. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The wind speed meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2500N

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170 ... 960 HLD, 17.9 ... 69.5 HRC, 3.5 ... 101.7 HRB, HB 19 ... 683 HB,
   80 ... 1042 HV, 30.6 ... 102.6 HS, 59.1 ... 88 HRA

- Accuracy: ± 0.5 HLD
- Type D impact device
- Measuring principle: Rebound method

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDO 10

The PCE-DDO 10 hardness tester is an ergonomic device to check Shore O hardness in gum. It has been designed with a high quality. The PCE-DDO 10 hardness tester is mainly used for soft gums. If the material thickness is not enough, it should be tightened on the back with the same material in order to increase its thickness.


- Handheld device
- For Shore O measurements
- Single and Serial-Measurements
- Data transfer to PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA A100L

The HVAC meter PCE-PDA A100L is suitable for the measurement of atmospheric pressure. This HVAC meter records the pressure from absolute zero to 200 kPa. The HVAC meter can be used for many mobile applications in industry and crafts. 

 

- Measuring range pressure: 0 ... 200 kPa absolute
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: < ± 0.5% of the measuring range
- USB interface
- Datalogger
- Different units

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 33N
In preventative maintenance, the high-resolution PCE-TC 33N infrared imaging camera is ideal for maintaining or repairing machinery or other equipment. The heart of the high-resolution infrared imaging camera PCE-TC 33N is an uncooled microbolometer (uncooled focal plane array) with a resolution of 220 x 160 pixels.

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 33N
In preventative maintenance, the high-resolution PCE-TC 33N infrared thermometer is ideal for maintaining or repairing machinery or other equipment. The heart of the high-resolution infrared thermometer PCE-TC 33N is an uncooled microbolometer (uncooled focal plane array) with a resolution of 220 x 160 pixels.

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA A100L

The manometer PCE-PDA A100L is suitable for the measurement of atmospheric pressure. This manometer records the pressure from absolute zero to 200 kPa. The manometer can be used for many mobile applications in industry and crafts.


- Measuring range pressure: 0 ... 200 kPa absolute
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: < ± 0.5% of the measuring range
- USB interface
- Datalogger
- Different units

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-2500N

PCE-2500N is a portable handheld pen-sized digital material hardness tester, rebound hammer or durometer for use with metals. This high-accuracy hardness tester quickly and accurately measures the surface hardness of 10 common metal materials including steel, cast steel, alloy tool steel, stainless steel, cast iron, ductile iron, cast aluminum alloy, brass, bronze and copper.


- Displays measurements in Rockwell A, B or C (HRA, HRB or HRC), Brinell (HB),
  Vickers (HV), Shore (HS) or Leeb (HLD)
- Measurement ranges: 170 ... 960 HLD, 17.9 ... 69.5 HRC, 3.5 ... 101.7 HRB, HB 19 ... 683 HB,
   80 ... 1042 HV, 30.6 ... 102.6 HS, 59.1 ... 88 HRA

- Accuracy: ± 0.5 HLD
- Type D impact device
- Measuring principle: Rebound method

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MO 2002

Milliohm Meter with ruggedized and waterproof carrying case. Includes 4 test leads with clips.


- Measuring ranges / resolution: 5 ranges, 0 ... 200 mΩ / 0 ... 2000 Ω
- Accuracy: ± 0.5% of reading
- Max. Output voltage: (C1-C2) 20 V
- Power source 12V DC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA A100L

The pressure gauge PCE-PDA A100L is suitable for the measurement of atmospheric pressure. This pressure gauge records the pressure from absolute zero to 200 kPa. The pressure gauge can be used for many mobile applications in industry and crafts.


- Measuring range pressure: 0 ... 200 kPa absolute
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: < ± 0.5% of the measuring range
- USB interface
- Datalogger
- Different units

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDA A100L

The pressure meter PCE-PDA A100L is suitable for the measurement of atmospheric pressure. This pressure meter records the pressure from absolute zero to 200 kPa. The pressure gauge can be used for many mobile applications in industry and crafts.


- Measuring range pressure: 0 ... 200 kPa absolute
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: < ± 0.5% of the measuring range
- USB interface
- Datalogger
- Different units

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TC 33N
In preventative maintenance, the high-resolution PCE-TC 33N pyrometer is ideal for maintaining or repairing machinery or other equipment. The heart of the high-resolution pyrometer PCE-TC 33N is an uncooled microbolometer (uncooled focal plane array) with a resolution of 220 x 160 pixels.

- IR resolution: 220 x 160 pixels
- Measuring range: -20 ... 450°C / -4  ... 842°F
- Thermal sensitivity: 70 mK
- Memory: 3 GB memory for more than 20,000 pictures
- 5 different color palettes
- Hot and cold spot location
- Picture in Picture function
Manufacturer: PCE Instruments
Test Instruments manufacturer