Industrial Measurement Products and Solutions
Order no.: PCE-WSAC 50-711

Besides the present wind speed, the Anemometer PCE-WSAC 50-711 shows the average wind speed of the previous 2 minutes and 5 minutes. This anemometer is very sensitive allowing recording of low wind speeds. The PCE-WSAC 50-711 can be utilised in many wind recording applications across all industry sectors, e.g. building, quarrying, green energy and assembly lines.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 4...20 mA
- Optional interface: RS-485 modbus

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-721

The prevailing wind speed and the mean wind speed (across two and five minutes) can be displayed by the PCE-WSAC 50-721 anemometer. The smallest of wind movement is detected by this convenient anemometer. The PCE-WSAC 50-721 anemometer is used for a variety of wind monitoring applications in both outdoor industry and outdoor sports.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 230 V AC
- Signal input: 0...10 V
- Optional interface: RS-485 modbus
- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-811

For measurement and display of both the current wind speed and the mean wind speed (over 120 seconds and 300 seconds), the PCE-WSAC 50-811 is an ideal anemometer. Measurement of the slightest of wind motion is achieved by this sensitive instrument. The PCE-WSAC 50-811 can be applied to multiple wind monitoring applications in building and maintenance, agriculture and aviation and many other industries.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 115 V AC
- Signal input: 4...20 mA
- Optional interface: RS-485 modbus

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-821

The PCE-WSAC 50-821 anemometer can be successfully applied to various wind monitoring applications. The instrument clearly displays the prevailing wind speed and additionally the average wind speed over 2 and 5 minutes. The slightest of wind movement is detected by the PCE-WSAC 50-821 anemometer. Aerospace, recycling plants and fruit production are some example areas that can benefit from the device.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 115 V AC
- Signal input: 0...10 V
- Optional interface: RS-485 modbus

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-911

If your situation requires monitoring of the wind speed and the average speed figure over 2 minutes and 5 minutes, the PCE-WSAC 50-911 is the right anemometer for you. The device handles wind speeds from 0 mph to 110 mph. Multiple types of outdoor industry can benefit from the PCE-WSAC 50-911 anemometer, for example construction, agriculture and wind energy.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 4...20 mA
- Optional interface: RS-485 modbus

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50-921

The PCE-WSAC 50-921 anemometer is used in a multitude of wind monitoring situations. Besides the actual wind speed, the average wind speed across 120 seconds and 300 seconds is presented. The lightest of wind movement is detected by the PCE-WSAC 50-921 anemometer, and the instrument can be helpful across the full spectrum of outdoor industries.


- Pre-alarm and full alarm with visual and audible warnings
- Measuring range: 0 ... 110 mph
- Power supply: 24 V DC
- Signal input: 0...10 V
- Optional interface: RS-485 modbus

- incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The hay contact thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay contact thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay contact thermometer PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30C

The counting scales PCE-SD 30C are low-cost robust verifiable system balances. The calibration of the counting scales is according to the trading class M III. The sturdy foundation of the counting scales is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 30 kg
- Readability: 10 g
- Minimum load: 200 g
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The hay digital thermometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay digital thermometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay digital thermometer PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDS 70
With the distance meter PCE-LDS 70, you can measure fill levels of containers, positions of workpieces on conveyor belts or thicknesses of rollers. You can also store and evaluate the data on your PC or connect the laser meter PCE-LDS 70 for control and readout to a PLC. 

- Measuring range: 0.05 ... 70 m / 0.2 ... 230 ft / 2.4 ... 2760 in
- Accuracy of  ± 2 mm or ± 0.08 inches
- Interface: RS232 to a PC
- Laser class: Class 2 according to IEC 60825-1: 2014
- Incl. factory calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N45F
The force indicator PCE-N45F is used to realize individual weighing solutions. The PCE-N45F force indicator can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

- Signal input range: 0 ... 10 mV / 0 ... 15 mV
- Supply voltage of the measuring cell: 5V
- Power supply: 24V DC
- Relay output
- Potential-free digital input
- Interface and analog output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The Humidity Detector PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The Humidity Detector features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The Humidity Detector PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The hay hygrometer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay hygrometer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay hygrometer PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The hay moisture analyzer PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay moisture analyzer features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay moisture analyzer PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50%
- Measuring range temperature: -10 ... 100°C / 14 ... 212°F
- Resolution of display: 0.1%
- Accuracy: 0.8%

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HMM 100

The hay moisture meter PCE-HMM is a professional device to designed to determine moisture and temperature of pressed hay and straw. The hay moisture meter features a sensor made of stainless steel, which can be purchased in four different lengths, while the wooden handle has an ergonomic design. The hay moisture meter PCE-HMM proves to be extremely robust, designed to withstand applications for many years.


- Measuring lance: 100 cm
- Measuring range moisture: 9 ... 50 %
- Measuring range temperature: -10 ... +100 °C
- Resolution of display: 0.1 %
- Accuracy: 0.8 %

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-N45F
The indicator PCE-N45F is used to realize individual weighing solutions. The PCE-N45F indicator can be used to connect load cells, force sensors, weighing platforms and other sensors that use strain gauges.

- Signal input range: 0 ... 10 mV / 0 ... 15 mV
- Supply voltage of the measuring cell: 5V
- Power supply: 24V DC
- Relay output
- Potential-free digital input
- Interface and analog output
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30C

The industrial scales PCE-SD 30C are low-cost robust verifiable system balances. The calibration of the industrial scales is according to the trading class M III. The sturdy foundation of the industrial scales is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 30 kg
- Readability: 10 g
- Minimum load: 200 g
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30C

The inventory scale PCE-SD 30C is a low-cost robust verifiable system balance. The calibration of the inventory scale is according to the trading class M III. The sturdy foundation of the inventory scale is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 30 kg
- Readability: 10 g
- Minimum load: 200 g
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-LDS 70
With the laser distance meter PCE-LDS 70, you can measure fill levels of containers, positions of workpieces on conveyor belts or thicknesses of rollers. You can also store and evaluate the data on your PC or connect the laser meter PCE-LDS 70 for control and readout to a PLC. 

- Measuring range: 0.05 ... 70 m / 0.2 ... 230 ft / 2.4 ... 2760 in
- Accuracy of  ± 2 mm or ± 0.08 inches
- Interface: RS232
- Laser class: Class 2 according to IEC 60825-1: 2014
- Incl. factory calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 30C

The parcel scale PCE-SD 30C is a low-cost robust verifiable system balance. The calibration of the parcel scale is according to the trading class M III. The sturdy foundation of the parcel scale is made of painted steel and features a plastic-coated steel platform.


- Weighing capacity: 30 kg
- Readability: 10 g
- Minimum load: 200 g
- Platform size: 400 x 500 mm
- Certifiable: M III

 

Manufacturer: PCE Instruments
Test Instruments manufacturer