Geiger Counter GS 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty

Geiger Counter with internal memory and software. This Geiger Muller meter has been usually used in nuclear power plants. Everyday it is most commonly used in the control and radiation testing of imported goods (steel, wood) from critical areas, as well as to measure the food which has been previously irradiated. This Geiger Counter can be also used to measure natural radioactive radiation as the one which appears near lakes.


- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV


IoT Sensor PCE-CP 30
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter IoT sensor is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter IoT sensor. With this multi-parameter IoT sensor, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
pH Meter PCE-CP 30
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter pH meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter pH meter. With this multi-parameter pH meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
Photometer PCE-CP 30
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
Radiation Detector GS 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty

Radiation detector with internal memory and software.


- Measurement ranges: 0.01 µSv/h - 1000 µSv/h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

 

Radioactivity Meter GS 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty

Radioactivity meter with internal memory and software.


- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alfa 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

 

Water Analysis Meter PCE-CP 30
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter water analysis meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water analysis meter. With this multi-parameter water analysis meter, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
Water Hardness Meter PCE-CP 30
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The multi-parameter water hardness meter is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter water hardness meter . With this multi-parameter water hardness meter , for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value.

- Adjustable units: mg / l, ppm
- Bluetooth connection with app
- 503 nm / 570 nm / 620 nm LED
- Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)
Parameters:
- Alkalinity
- Chlorine
- Cyanuric acid
- pH
- Total hardness
- Calcium hardness
- Active oxygen
- Chlorine dioxide
- Bromine
- Ozone
- Hydrogen peroxide
- PHMB (polyhexanide)
- Urea
Weather Station CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Weather station with 4 ... 20 mA output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes
Wind Measurer CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wind measurer with 4 ... 20 mA output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes
Wind Speed Alarm / Wind Alarm Controller CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wind Speed Alarm / Wind Alarm Controller with 4 ... 20 mA output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes
Wind Speed Meter CWG 1
£ 356.00
Price excl. VAT &. delivery
2 year Warranty
Wind speed meter with 4 ... 20 mA output. Wind speed meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the wind speed meter is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

- Measuring range: 0 ... 50 m/s
- Output signal: 4 ... 20 mA
- Mounting: Pipe mounting / mounting via PG screw connection
- Heating: yes
Air Humidity Meter PCE-THT 10-ICA incl. ISO Calibration Certificate
£ 355.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The air humidity meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the air humidity meter can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
- incl. ISO Calibration Certificate
Air Quality Meter PCE-THT 10-ICA incl. ISO Calibration Certificate
£ 355.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The air quality meter has a temperature measuring range of -20 ... 60 °C and a humidity measuring range of 0 ... 99.9% RH. The readings from the air quality meter can be read directly on the 2.3" color display.

Temperature measurement
- Measuring range: -20 ... 60 °C / -4 ... 140 °F
Humidity measurement
- Measuring range: 0 ... 99.9% RH
- Data memory for 12800 measuring points
- For mounting on the wall
- WiFi interface
- incl. ISO Calibration Certificate
Checkweighing Scale PCE-EP 150P2
£ 355.00
Price excl. VAT &. delivery
2 year Warranty

The robust checkweighing scale is a real all-rounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 60/150 kg
- Readability: 10/20 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Checkweighing Scale PCE-EP 30P2
£ 355.00
Price excl. VAT &. delivery
2 year Warranty

The robust checkweighing scale is a real all-rounder. The stand of the checkweighing scale can be easily separated along with the tripod mount from the platform and possibly sunk into the workbench. The cable between the platform and the display has a plug attached and is about 1.6 m long.


- Weighing range: 15/30 kg
- Readability: 2/5 g
- P2 - weighing surface: 500 x 600 mm
- Removable tripod
- Calibrateable

Checkweighing Scale PCE-MS PP150-1-60x70-M
£ 355.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The checkweighing scale is assessed for compliance for the largest possible geographic area around the intended location of the scale. This conformity assessment for accuracy class M III replaces the first verification. It is carried out for the location specified by the customer. The compact, checkweighing scale is powder-coated and therefore well suited for use under harsh conditions.

- Measuring range [Max]: 150 kg / 330 lb
- Resolution [d]: 50 g / 1.7 oz
- Dimensions weighing plate [WxD]: 60 x 70 cm / 23.6 x 27.5"
- Usable area [WxD]: 60 x 66 cm / 23.6 x 25.9" (with backrest)
- Interface: USB-B (bidirectional)
- incl. MIII verification (conformity-assessed)
Checkweighing Scale PCE-MS PP300-1-60x70-M
£ 355.00
Price excl. VAT &. delivery
2 year Warranty
Verification for Trade / conformity assessment
The checkweighing scale is assessed for compliance for the largest possible geographic area around the intended location of the scale. This conformity assessment for accuracy class M III replaces the first verification. It is carried out for the location specified by the customer. The compact checkweighing scale is powder-coated and therefore well suited for use under harsh conditions.

- Measuring range [Max]: 300 kg / 661 lb
- Resolution [d]: 100 g / 3.5 oz
- Dimensions weighing plate [WxD]: 60 x 70 cm / 23.6 x 27.5"
- Usable area [WxD]: 60 x 66 cm / 23.6 x 25.9" (with backrest)
- Interface: USB-B (bidirectional)
- incl. MIII verification (conformity-assessed)