Industrial Measurement Products and Solutions
Order no.: PCE-PTR 200N
The PCE-PTR 200N dynamometer is a hand-held device up to 200 N. The PCE-PTR 200N dynamometer can determine the units N, kg and lb. The PCE-PTR 200N dynamometer comes with various shaped adapters. With the PCE-PTR 200N dynamometer both tensile and compressive forces can be measured.

- Measuring range: 0 ... 200 N / 0 ... 45 lbs
- Measurement accuracy: ± 0.5%
- Units: n, kg, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Manufacturer: PCE Instruments
£ 335.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PTR 200N
The PCE-PTR 200N force gauge is a hand-held device up to 200 N. The PCE-PTR 200N force gauge can determine the units N, kg and lb. The PCE-PTR 200N force gauge comes with various shaped adapters. With the PCE-PTR 200N force gauge both tensile and compressive forces can be measured.

- Measuring range: 0 ... 200 N / 0 ... 45 lbs
- Measurement accuracy: ± 0.5%
- Units: n, kg, lb
- Integrated load cell with M6 connection
- Evaluation via USB interface
- Downloadable evaluation software
Manufacturer: PCE Instruments
£ 335.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: RD1706

The Geiger Counter Radex RD1706 shows gamma-, x-ray- and beta radiation. The radiation monitor is able to measure radiation areas in a house as well as on human beings. Thanks to the comfortable construction of the Geiger Counter it especially qualifies for the mobile use and there will not occur any problems storing the measuring instrument. The fast measurement depends on a dose power value. However, a measurement will be done in just 1-26 seconds.


- Dose rates: 0.05 ... 999 Sv / h
- Gamma radiation: 0.1 ... 1.25 MeV
- X-rays: 0.03 ... 3.0 MeV
- Beta radiation: 0.25 ... 3.5 MeV
- Limit: 0.1 ... 99.0 Sv / h

 

Manufacturer: ATWA-STED GbR
£ 335.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: RD1706

The Radioactivity Meter Radex RD1706 shows gamma-, x-ray- and beta radiation. The radiation monitor is able to measure radiation areas in a house as well as on human beings.


- Dose rates: 0.05 ... 999 Sv / h
- Gamma radiation: 0.1 ... 1.25 MeV
- X-rays: 0.03 ... 3.0 MeV
- Beta radiation: 0.25 ... 3.5 MeV
- Limit: 0.1 ... 99.0 Sv / h

 

Manufacturer: ATWA-STED GbR
£ 335.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-LOC 10
The calibrator is used to simulate 0/4 ... 20-mA signals. The calibrator can be used to calibrate display devices, data loggers, process recorders etc. 

Function:
- Current simulation (active)
- Current simulation (passive)
- Voltage transmitter f. current loop
- Voltage measurement
- Current measurement
Manufacturer: PCE Instruments
£ 334.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-LOC 10
The current calibrator is used to simulate 0/4 ... 20-mA signals. The current calibrator can be used to calibrate display devices, data loggers, process recorders etc. 

Function:
- Current simulation (active)
- Current simulation (passive)
- Voltage transmitter f. current loop
- Voltage measurement
- Current measurement
Manufacturer: PCE Instruments
£ 334.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-LOC 10
The process calibrator is used to simulate 0/4 ... 20-mA signals. The process calibrator can be used to calibrate display devices, data loggers, process recorders etc. 

Function:
- Current simulation (active)
- Current simulation (passive)
- Voltage transmitter f. current loop
- Voltage measurement
- Current measurement
Manufacturer: PCE Instruments
£ 334.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-LOC 10
The voltage calibrator is used to simulate 0/4 ... 20-mA signals. The voltage calibrator can be used to calibrate display devices, data loggers, process recorders etc. 

Function:
- Current simulation (active)
- Current simulation (passive)
- Voltage transmitter f. current loop
- Voltage measurement
- Current measurement
Manufacturer: PCE Instruments
£ 334.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
£ 333.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a paint thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The paint thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
£ 333.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a surface testing - coating thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The coating thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
£ 333.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-CT 5000H-ICA

PCE-CT 5000H is a thickness measuring instrument used for the rapid determination of coating thicknesses on ferrous (Type F) and non-ferrous (Type N) metals. The thickness gauge automatically detects the type of metal to be measured.


- Type F measuring range: 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mils
- Type N measuring range: 0 ... 3000 µm / 0 ... 3 mm / 0 ... 118 mils
- Displays measuring units in μm, mm or mils
- Saves up to 2000 measurements to internal memory
- Practical V-groove on the measuring head
- Incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
£ 333.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VE 200-KIT2

PCE-VE 200 is a automotive tester / borescope or inspection camera, for nondestructive evaluation (NDE) and machine diagnostics. The PCE-VE 200 automotive tester provides excellent image quality at an affordable price. An ideal camera tool for diagnosing hard-to-reach places, the scope can be rotated 180 ° and offers 6 LED lights with adjustable intensity for optimal illumination. In addition, digital image magnification or zoom of up to 4 times is available.


Automotive Tester
- 3.5 in LCD display
- 3.28 ft cable length
- 0.18 in camera cable diameter
- 1/8 in camera head / CMOS chip image sensor
- 640 x 480 pixels AVI video resolution
- Micro SD card memory
- Micro USB 2.0 and TV outputs

Clamp Meter
This Clamp Meter has been developed to determine indirectly, the the AC/DC currents with high accuracy. A non-contact clamp meter and a torch to illuminate the area being measured, have been integrated into this device. The small size of this  Clamp Meter, makes it possible to use in small spaces with limited access.

- 4 digit LCD display with backlighting
- save function
- DCA zero rest function
- current tester, non-contact
- integrated light to illuminate measured area
- automatic range selection
- automatic disconnect
- clamp diameter: 18 mm 

 

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VE 200SV3

The automotive tester PCE-VE 200SV3 is a nondestructive inspection camera. Thus, the automotive tester PCE-VE 200SV3 is the ideal instrument for diagnosis in hard-to-reach places. For example, the areas of mechanical engineering, sanitary and heating engineering, and the entire construction and construction industry are among the main areas of application of the automotive tester PCE-VE 200SV3.

- Camera head diameter 9 mm / 0.4 in
- Cable length: 3 m / 9.9 ft
- Interface: Micro USB 2.0
- Memory: Micro SD card
- Front and side view camera

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-894
The condition monitoring thermometer PCE-894 with double laser has a temperature range of -50 ... 1850°C / -58 ... 3362°F. The condition monitoring thermometer PCE-894 has an optical resolution of 50: 1 and enables a precise, non-contact temperature measurement of very small areas.

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface
Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure manometer, meter or gauge used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure meter, gauge or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-910-ICA

PCE-910 is a portable handheld digital differential pressure vacuum gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

- Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
- Resolution: 100 Pa / 0.0145 psi / 0.001 bar
- 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
- Optional PC software with RS-232 cable sold separately as a data transfer accessory
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-894
The digital thermometer PCE-894 with double laser has a temperature range of -50 ... 1850°C / -58 ... 3362°F. The digital thermometer PCE-894 has an optical resolution of 50: 1 and enables a precise, non-contact temperature measurement of very small areas.

- Temperature range from -50 ... 1850°C / -58 ... 3362°F
- Adjustable emissivity
- Short response time of 150 ms
- With thermocouple input
- Bluetooth interface
Manufacturer: PCE Instruments
£ 329.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer