Industrial Measurement Products and Solutions
Order no.: 22037 I
Sewer leak test set 
Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Test Instruments manufacturer
Order no.: PCE-MSR 340
The heating magnetic stirrer PCE-MSR 340 is an ideal tool in the laboratory. The magnetic stirrer is able to stir and heat liquids up to 10 l. The ceramic plate creates good contact between the magnetic stirrer and the laboratory vessel.

- Drive of the stirring point: brushless motor
- Stirring amount: 1 ... 10 l
- Adjustable speed: 60 ... 2200 rpm
- Heating range: up to 400°C / 752°C
- Stirring surface: 180 x 140 mm / 7.1 x 5.5 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: Gasman-O2

The Air Quality Meter Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO

The Carbon Monoxide Meter Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Carbon Monoxide Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Carbon Monoxide Meter fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO

The Gas Detector Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O2

The Gas Detector Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-CO

The Gas Leak Detector Gasman-CO is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For CO (Carbon Monoxide)
- Dust and water resistant - IP 65/67
- 0... 500 ppm

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: Gasman-O2

The Gas Leak Detector Gasman-O2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.


- Non-rechargeable, 1-year battery
- For NO2 (Oxygen)
- Dust and water resistant - IP 65/67
- 0... 25% v/v

 

Manufacturer: Crowcon Detection Instruments Ltd.
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this data logger PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- Evaluation software
- 32 GB SD memory card
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this accelerometer PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PS 75XL

Extremely affordable, bench scale for everyday use. The bench scale has a platform size 600 x 900 x 80 mm. The capacity of the bench scale is 75 kg or 150 kg. Initialise the balance, weigh - it could not be easier.


- Weighing range: 75 kg
- Readability: 20 g
- Weighing surface: 600 x 900 mm
- Calibrateable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330

PCE-330 is a climate meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this multifunction data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this climate meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 24I
For this vibration meter PCE-VDL 24I the acceleration sensor is delivered with a sampling rate of 1600 Hz. The sensor measures the acceleration, which is currently acting on it (3 axes), for example shock / vibration. The measurements take place at predetermined (selectable) time intervals.

- 3-Axis acceleration up to 1600 Hz and ±16 g
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01-ICA

PCE-P01 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 13.8 kPa / ± 2 psi / ± 0.137 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-P01-ICA

PCE-P01 is a portable handheld digital differential pressure meter used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-P01 displays min / max / average values right on the meter's screen for comparison against current measurement values.

- Measuring Range: ± 13.8 kPa / ± 2 psi / ± 0.137 bar

- Resolution: 6.9 Pa / 0.001 psi / 0.000069 bar

- Displayable Units: bar, mmHg, ozin², kgcm², psi, inH2O, kPa, ftH2O, inHg, cmH2O, mbar

- Features real-time data-logging capabilities using the included PC software and USB cable

- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 50N
This dynamometer is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0 ... 50 N / 0 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Differently shaped measuring adapter
- Device for mounting on test stands
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330

PCE-330 is a multifunction handheld environmental meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330

PCE-330 is an environmental tester or meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FM 50N
This force gauge is a tensile / compressive force gauge. This traction / compression force gauge has an internal load cell. It is a portable traction / compression force gauge that can be installed in a force measurement stand.

- Measuring range: 0 ... 50 N / 0 ... 11 lbs
- Resolution: 0.01 N / 0.002 lbs
- Evaluation via USB interface
- Differently shaped measuring adapter
- Device for mounting on test stands
Manufacturer: PCE Instruments
Test Instruments manufacturer