The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The Wind Measurer is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s  … 50 m/s (1.1 ... 111.8 mph)

 

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

The Wind Speed Meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The Wind Speed Meter is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

The PCE-228 environmental meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the environmental meter to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232

The PCE-228 environmental tester is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232

Clamping table for HTGS for samples with Ø from 7 to 50 mm (max. 5 Nm nominal load).

Including clamping pins (ST-P) with urethane surface, length 10 mm. Recommended for locks, containers for eye drops, etc.

The PCE-228 pH meter is a very easy-to-use handheld pH / mV / °C meter. The pH value and the temperature can be saved directly on the SD card (Excel file) or transferred directly from the pH meter to a PC via the RS-232 interface.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS-232

The PCE-228 water analysis meter is an easy-to-use handheld device for measuring pH, mV and °C. With the PCE-228 water analysis meter, both temperature and pH values can be directly stored onto a SD card (in Excel format), or transferred to a PC through an RS-232 interface.

Measurement range:
- pH: 0.00 to 14.00 pH
- Redox: -1999 to 0 to 1999 mV (only with the optional Redox electrode)
- Temperature: 0.0...65.0 °C or 32 ... 149 °F (only with the temperature sensor)

 

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

PCE-VS10 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS and peak value of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features a red and green visual warning or alarm with programmable high pass and low pass filters.

- Frequency range (max.): 0.1 Hz ...10 kHz
- Measuring range: Acceleration = 0.1 ... 1000 m/s², Speed = Frequency-dependent
- Connections: Screw terminals for power supply (5 ... 30V DC) and Micro USB (internal)
- Mounting: M8 stud bolt

The condition monitoring sound level meter is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, the condition monitoring sound level meter is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option
- Incl. calibration certificate

The data logger with USB interface is a handheld, portable, professional Class II noise meter, sound meter or decibel (dB) meter with built-in data-logging or data-recording functionality. Thus, the data logger with USB interface is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- ISO calibration available as an option
- Incl. calibration certificate

The recorded decibel readings of the Data Logging Sound Level Meter PCE-322A help users determine if and what protective measures need to be taken to ensure overall health, safety and productivity in industrial, commercial, occupational, educational and residential environments. This sound level meter is supplied with an ISO calibration certificate.

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- Incl. ISO Calibration Certificate