Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 HVAC Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F industrial borescope. There is easy control of the camera head with the PCE-VE 1034N-F industrial borescope. The PCE-VE 1034N-F industrial borescope allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F inspection camera. There is easy control of the camera head with the PCE-VE 1034N-F inspection camera. The PCE-VE 1034N-F inspection camera allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Power Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 Three Phase Power Data Logger is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PA 8300

The easy-to-use PCE-PA 8300 3-Phase Power Meter is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC or (Set 2) 30 A ...
  3000 A AC

- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1014N-F

The two-way optics is a great advantage of the PCE-VE 1014N-F videoscope or inspection camera. There is easy control of the camera head with the PCE-VE 1034N-F videoscope. The PCE-VE 1034N-F videoscope allows you to capture images and videos, and the videos are also stored with an audio recording. 


- Cable length: 1.5 m / 4.9 ft
- Camera head: 2-way
- Diameter: 4.5 mm / 0.18 in
- Resolution: 640 x 480 Pixel
- Storage of pictures and videos
- 8 GB memory card incl.
- LED lighting

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100HSH+

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100HSH+

The ultrasonic flow meter is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TDS 100HSH+

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 20-ICA

The PCE-DDM 20 Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20 Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied with remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W5

This handy product is a mobile material tester in the Hommel Etamic series from Jenoptik. This mobile material tester is particularly well suited to take quick roughness measurements on machines.


- Measuring range: 320 μ (-210 / + 110)
- Resolution: 5 nm
- Unit: micron / μinch selectable

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W5

This handy product is a mobile profilometer in the Hommel Etamic series from Jenoptik. This mobile profilometer is particularly well suited to take quick roughness measurements on machines.


- Measuring range: 320 μ (-210 / + 110)
- Resolution: 5 nm
- Unit: micron / μinch selectable

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W5

This handy product is a mobile roughness tester in the Hommel Etamic series from Jenoptik. This mobile roughness tester is particularly well suited to take quick roughness measurements on machines.


- Measuring range: 320 μ (-210 / + 110)
- Resolution: 5 nm
- Unit: micron / μinch selectable

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W5

This handy product is a mobile surface roughness tester in the Hommel Etamic series from Jenoptik. This mobile surface roughness tester is particularly well suited to take quick roughness measurements on parts and machines.


- Measuring range: 320 μ (-210 / + 110)
- Resolution: 5 nm
- Unit: micron / μ inch selectable

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: PCE-RVI 2 V1L

PCE-RVI 2 V1L is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles L1, L2, L3 and L4 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 3  ... 2,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RVI 2 V1R

PCE-RVI 2 V1R is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 20  ... 13,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized sensor that allows the material tester to determine the surface roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RT 2300-ICA
The profilometer PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 profilometer tester has a detachable motorized sensor that allows the material tester to determine the surface profile roughness even on small or narrow profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer