Industrial Measurement Products and Solutions
Order no.: RT STROBE 7000 LED

The main advantage of a steady-state stroboscope RT STROBE 7000 LED with intelligent LED-technology results from the absence of a short life xenon-tube. The STROBE 7000 LED is able to flash up to 120,000 flashed per minute at 9000 LUX with its 200 LEDs.


- Frequency range: 0 ... 120,000 FPM (flashes per minute)
- Large area illumination 300 x 500 mm
- Adjustable illuminance: as standard, with rotary knob, from 30 - 100%
- High light intensity
- 9000 LUX at 30 cm


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: B-One Plus

B-One Touch is a rotational viscometer or rheometer used in industrial and research applications to measure the viscosity of non-Newtonian liquids or thixotropic fluids. Featuring a torque range from 0.05 to 13 mNm, this digital viscometer is delivered with either L1-L4 or R2-R7 spindles and displays measurements in millipascal-second (mPa.s) or centipoise (cP).


- Rotational speed: Freely adjustable from 0.3 ... 250 rpm
- Viscosity range: 15 ... 2,000,000 mPa.s / cP (L1-L4) or 100 ... 240,000,000 mPa.s / cP (R2-R7)
- Accuracy: ±1 % full scale (FS)
- Ideal for pseudoplastic or non-Newtonian liquids

Manufacturer: LAMYRHEOLOGY
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m/min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the Dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the Dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Edge Band Tester is designed to check the adhesive force of edges and edge bands on support materials. With the edge band tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 force gauge is designed to check the adhesive force of edges and edge bands on support materials. With the force gauge, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Force Gauge is designed to check the adhesive force of edges and edge bands on support materials. With the Force Gauge, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m/min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 tension dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the tension dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 tension dynamometer is designed to check the adhesive force of edges and edge bands on support materials. With the tension dynamometer, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m/min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 Test Stand and Device for Peel Tests is designed to check the adhesive force of edges and edge bands on support materials. With the Test Stand and Device for Peel Tests, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCWHU10

The PCE-MCWHU10 Crane Scale is made for industrial use with its large weight range and readability. The housing of the Crane Scales have an IP 67 protection, making the instrument well suited for rough environments. Thanks to the display's high contrast and large digit height, the Crane Scales are easy to read from a distance. The included remote control allows you to operate the Crane Scales from a distance of up to 8 meters.


- Capacity [Max]: 10000 kg / 22046 lbs
- Readability [d]: 2 kg / 4.4 lbs
- Capacity [Min]: 100 kg / 220 lbs

 

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-MCWHU10

The PCE-MCWHU10 Force Gauge is made for industrial use with its large weight range and readability. The housing of the Force Gauge has an IP 67 protection, making the instrument well suited for rough environments. Thanks to the display's high contrast and large digit height, the Force Gauge is easy to read from a distance. The included remote control allows you to operate the Force Gauge from a distance of up to 8 meters.


- Capacity [Max]: 10000 kg / 22046 lbs
- Readability [d]: 2 kg / 4.4 lbs
- Capacity [Min]: 100 kg / 220 lbs

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MCWHU10

The PCE-MCWHU10 Hanging Scales are made for industrial use with their large weight range and readability. The housing of the hanging scales have an IP 67 protection, making the instrument well suited for rough environments. Thanks to the display's high contrast and large digit height, the hanging scales are easy to read from a distance. The included remote control allows you to operate the hanging scales from a distance of up to 8 meters.


- Capacity [Max]: 10000 kg / 22046
- Readability [d]: 2 kg / 4.4 lbs
- Capacity [Min]: 100 kg / 220 lbs

Manufacturer: Dini Argeo GmbH
Test Instruments manufacturer
Order no.: PCE-DDM 50WI

The PCE-DDM 50WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50WI

The PCE-DDM 50WI Force Gauge is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 50WI Force Gauge is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50WI

The PCE-DDM 50WI Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The hanging scales are delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DDM 50WI

The Tension Load Cell  PCE-DDM 50WI is the ideal tool for weighing big loads and for measuring strong tensile forces. The Tension Load Cell  PCE-DDM 50WI is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 50,000 kg / 500 kN / 110,231 lbs
- Resolution: 20 kg / 200 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PQC 32EU
The PCE-PQC 32EU particle counter measures 6 user-selectable particle size channels. This particle counter PCE-PQC 32EU stores up to 45,000 measured values ​​with time stamp.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer