Order no.: PCE-320

With the PCE-320 Environmental Tester it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Environmental Tester offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: AQ-FM S900

The fixed gas detector base AQ-FM S900 for AQ-sensor heads can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4-20 mA gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included. Wall mounting kit.


- Analog Output: 4-20 mA (optional isolated), 10... 30V
- External control signal: Min Max. Alarm, control and diagnostics
- Power supply: 12V DC 1A power supply is required but not supplied
- Interface: RS485


Attention! No AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

 

Manufacturer: Aeroqual
Test Instruments manufacturer
Order no.: PCE-DPD-F1
The built-in display is used to indicate the force and weight, which is detected by force sensors and load cells with strain gauges. The output signal of the measuring cell is irrelevant because the DMS display makes it possible to display the correct weight in mV / V based on the set sensitivity. The DMS display shows the measured values ​​on a 6-digit LED display. 

- Power supply: 85 ... 265V AC / DC
- Input signal: mV / V for force and weighing sensors
- Display: 6 digits, red
- Digit height : 14 mm
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRC 1

PCE-DRC 1 is a handheld digital refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants. The refractometer also works well for measuring cleaning products. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Coolant or antifreeze (ethylene glycol), propylene glycol,
   battery acid, cleaning supplies, temperature

- Measurement range: -50 ... 0 °C
- Resolution: 0.1 °
- Accuracy: ±0.5 °C
- Automatic temperature compensation (ATC)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRP 1

PCE-DRP 1 is a handheld digital refractometer used to determine the sugar content / coffee p1 / refractive index of coffee and similar liquids in the 0 ... 50 % Brix / 0 ... 25 coffee p1 / 1.3330 ... 1.4200 nD measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, coffee p1, refractive index, temperature
- Measurement range: 0 ... 50 % Brix 
- Resolution: 0.1 % Brix
- Accuracy: ±0.2 % Brix 
- Automatic temperature compensation (ATC)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-DRW 1

PCE-DRW 1 is a handheld digital refractometer used to determine the sugar content / specific gravity of beer and similar liquids in the 0 ... 50 % Brix / 1.000 ... 1.130 d 20⁄20 measuring range. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 ... +40 °C / +50 ... +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:
- Brix, specific gravity (d 20⁄20), temperature
- Measurement range: 0 ... 50 % 
- Resolution: 0.1 % Brix 
- Accuracy: ±0.2 % Brix
- Automatic temperature compensation (ATC)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Humidity Detector it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Humidity Detector offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Heat Stress Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Heat Stress Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 HVAC Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The HVAC Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Hygrometer it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Hygrometer offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT

The LXT Illuminometer consists of a flow sensor with handle and a wall bracket to 1.5 m cable, a light transmitter, and a digital display. The main use of the Illuminometer is in the continuous light measurement and light monitoring of photo labs and production areas, such as food or drug manufacturing.


- Measuring range: 0 ... 50000 Lux in three areas
- Resolution: 0.1 lx / lx 1
- Accuracy: ± 5% of reading
- 4 to 20-mA analog output

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSH 10000-ICA

PCE-BSH 10000 is a an accurate compact LAB scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this LAB scale has a USB port for data transfer and printing.


- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.6 ... 10000 g / 0.0014 ... 22 lbs
- Readability or resolution: 0.2 g
- Accuracy: ± 0.6 g
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSH 6000-ICA

PCE-BSH 6000-ICA is an accurate compact LAB scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this LAB scale has a USB port for data transfer and printing.


- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSH 10000-ICA

PCE-BSH 10000 is a an accurate compact laboratory scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this laboratory balance has a USB port for data transfer and printing.


- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.6 ... 10000 g / 0.0014 ... 22 lbs
- Readability or resolution: 0.2 g
- Accuracy: ± 0.6 g
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-BSH 6000-ICA

PCE-BSH 6000 is an accurate compact laboratory scale or balance with piece or part counting functionality. Ideal for use in kitchens, laboratories and offices, this laboratory balance has a USB port for data transfer and printing.


- Weighing unit selections: g, oz, lb, dwt, ozt, ct, tl.T, tl.H, tl.J, GN, dr, MM, ToLA,
  GSM, TAR, TMR
- Weighing range: 0.3 ... 6000 g / 0.00066 ... 13 lbs
- Readability or resolution: 0.1 g
- Accuracy: ± 0.3 g
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT

The LXT Light Meter consists of a flow sensor with handle and a wall bracket to 1.5 m cable, a light transmitter, and a digital display. The main use of the Light Meter is in the continuous light measurement and light monitoring of photo labs and production areas, such as food or drug manufacturing.


- Measuring range: 0 ... 50000 Lux in three areas
- Resolution: 0.1 lx / lx 1
- Accuracy: ± 5% of reading
- 4 to 20 mA analog output

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT

The LXT Lux Meter consists of a flow sensor with handle and a wall bracket to 1.5 m / 4.9 ft cable, a light transmitter, and a digital display. The main use of the Lux Meter is in the continuous light measurement and light monitoring of photo labs and production areas, such as food or drug manufacturing.


- Measuring range: 0 ... 50000 Lux in three areas
- Resolution: 0.1 lx / lx 1
- Accuracy: ± 5% of reading
- 4 to 20-mA analog output

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 22BT
With this Material Tester, layer thicknesses on metallic surfaces can be reliably determined. The Material Tester has a measuring range of 1500 µm. This means that the Material Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert
- Measuring range up to 1500 µm
- Measurable substrates: Fe, NFe
- Probe: internal
- Micro USB and Bluetooth interface
- Data storage for up to 600 measured values
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20

PCE-VA 20 is a multifunction air flow meter for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 20

PCE-VA 20 is a multifunction air flow meter for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.


- Measures air flow velocity, volume flow, relative humidity, air temperature, dew
  point temperature and wet-bulb temperature
- Air flow velocity range: 0.2 ... 30 m/s (39.4 ... 5905.5 fpm)
- Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of
  measured value + 0.3 m/s) when more than 20 m/s
- Resolution: 0.1

Manufacturer: PCE Instruments
Test Instruments manufacturer