Order no.: PCE-830-2

The PCE-830-2 Three Phase Power Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three Phase Power Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Manufacturer: PCE Instruments
£ 1,949.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HSH-TG50
The measuring principle of the two devices is quite simple. The ultrasonic flow meter can be used for measuring on metallic pipes, plastic pipes or rubber pipes, while the ultrasonic material thickness meter can be used for metals, glass and homogeneous plastics.

Ultrasonic flow meter
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Flow sensors for 20 ... 108 mm (approx. 3/4 … 4") pipe diameter
- Flow sensors for 50 ... 700 mm (approx. 2 … 28") pipe diameter
Ultrasonic thickness meter
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
Manufacturer: PCE Instruments
£ 1,945.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HSH-TG50
The measuring principle of the two devices is quite simple. The ultrasonic flow meter can be used for measuring on metallic pipes, plastic pipes or rubber pipes, while the ultrasonic material thickness meter can be used for metals, glass and homogeneous plastics.

Ultrasonic flow meter
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Flow sensors for 20 ... 108 mm (approx. 3/4 … 4") pipe diameter
- Flow sensors for 50 ... 700 mm (approx. 2 … 28") pipe diameter
Ultrasonic thickness meter
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
Manufacturer: PCE Instruments
£ 1,945.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TDS 100HSH-TG50
The measuring principle of the two devices is quite simple. The ultrasonic flow tester can be used for measuring on metallic pipes, plastic pipes or rubber pipes, while the ultrasonic material thickness tester can be used for metals, glass and homogeneous plastics.

Ultrasonic flow tester
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Flow sensors for 20 ... 108 mm (approx. 3/4 … 4") pipe diameter
- Flow sensors for 50 ... 700 mm (approx. 2 … 28") pipe diameter
Ultrasonic thickness tester
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
Manufacturer: PCE Instruments
£ 1,945.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CSI 25
The dynamometer for in-house weighing of up to 25 t. The dynamometer has a large shackle on the top and a rotatable hook with a safety catch on the underside. The dynamometer is operated using the infrared remote control supplied.

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
Manufacturer: PCE Instruments
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CSI 25
The force gauge for in-house weighing of up to 25 t. The force gauge has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gauge is operated using the infrared remote control supplied.

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
Manufacturer: PCE Instruments
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CSI 25
The hanging scales for in-house weighing of up to 25 t. The hanging scales have a large shackle on the top and a rotatable hook with a safety catch on the underside. The hanging scales are operated using the infrared remote control supplied.

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
Manufacturer: PCE Instruments
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CSI 25
The heavy duty crane scale for in-house weighing of up to 25 t. The heavy duty crane scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The heavy duty crane scale is operated using the infrared remote control supplied.

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
Manufacturer: PCE Instruments
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CSI 25
The weighing hook for in-house weighing of up to 25 t. The weighing hook has a large shackle on the top and a rotatable hook with a safety catch on the underside. The weighing hook is operated using the infrared remote control supplied.

- Weighing range: 25,000 kg / 55,115 lb
- Resolution: 10 kg / 22 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
Manufacturer: PCE Instruments
£ 1,931.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-VC20

PCE-VC20 is a vibration meter calibrator used to calibrate vibration sensors, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

Manufacturer: PCE Instruments
£ 1,914.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PQC 13EU
The air quality meter PCE-PQC 13EU detects quickly where e.g. particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
£ 1,909.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PQC 13EU
The Dust Measuring Device PCE-PQC 13EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
£ 1,909.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PQC 13EU
The Dust Monitor PCE-PQC 13EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
£ 1,909.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PQC 13EU
The particle counter PCE-PQC 13EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

- Measuring range: 0.5 ... 25 μm
- Measuring channel sizes: 0.5, 1.0, 5.0 μm
- Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
- ISO 14644-1, EU GMP Annex I, FS 209E
- Mass concentration
- USB
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
£ 1,909.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA

The PCE-DDM 20WI Crane Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20WI Crane Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA
The dynamometer is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the dynamometer. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied without remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA
The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied without remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA

The PCE-DDM 20WI Hanging Scale is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20WI Hanging Scale is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA
The tension load cell is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the tension load cell. Despite the high measuring capacity, these materials enable a compact design with a low weight.

- Measurement range: 20,000 kg / 200 kN / 44,092 lb
- Resolution: 10 kg / 100 N / 22 lb
- Minimum load: 200 kg / 440 lb
- Supplied without remote control indicator
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DDM 20WI-ICA

The PCE-DDM 20WI weighing hook is the ideal tool for weighing big loads and for measuring strong tensile forces. The PCE-DDM 20WI weighing hook is delivered in a protective carrying case and includes two shackles made of heavy-duty steel. The instrument is manufacturer calibrated, but can be certified to ISO standards for an additional fee.


- Measurement range: 20,000 kg / 200 kN / 44,092 lbs
- Resolution: 10 kg / 100 N
- Units of measurement: kg / t / lbs / N / kN
- Supplied without remote control indicator
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 1,900.00

Price excl. VAT &. delivery
2 year Warranty