Industrial Measurement Products and Solutions
Order no.: PCE-RVI 2 V1L

PCE-RVI 2 V1L is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles L1, L2, L3 and L4 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 3  ... 2,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RVI 2 V1R

PCE-RVI 2 V1R is a rotational viscometer used in industrial and research applications to measure viscosity according to BS, ISO and ASTM standards. Featuring a plug-and-play sensor for temperature control to help ensure accurate test results, this digital viscometer is delivered with spindles R2, R3, R4, R5, R6 and R7 and displays measurements in millipascal-second (mPa.s) or centipoise (cP), depending on the rotational speed and the type of spindle used.


- Rotational speed: 0.3, 0.5, 0.6, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 10, 12, 20, 30, 50, 60,
  100, 200 rpm

- Viscosity range: 20  ... 13,000,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-10

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- 10 Newtons UCI probe / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-98

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- 98 Newtons UCI probe / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-10

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-98

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-10

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-98

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- 50 Newtons UCI probe / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-10

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-3500-98

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: C.A 6240

With the highly accurate Ohmmeter C.A 6240, a poor contact line between two measure points can immediately be detected. Measurements with the Ohmmeter C.A 6240 are accurate and reliable since the test power achieves levels of up to 10 A.


- Measuring ranges: 5 μΩ ... 399.9 Ω
- Resolution: 1 μΩ ... 100 mΩ
- Accuracy: ± 0.25% of reading, ± 2 digits
- No load voltage: 4 V ... 6 V (max.)

 

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: PCE-SD 1500
The calibrated floor scales are ideal if you do not want to put scales into the ground. Simply place the floor scales in the room, fix the floor scales to the ramp with the fixing plates included in the scope of delivery, connect the operating terminal to the socket, and you can start weighing.

- Weighing range: 1500 kg
- Readability: 0.5 kg
- Calibration included
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 3000F
The verifiable built-in floor scale of the PCE-SD ... F series is intended for flush installation and is optionally available with a built-in frame on request. The calibrated built-in floor scale is calibrated according to Calibration Class III and is approved throughout the EU for use for transfer of goods for two years.

- Weighing range : 3000 kg
- Readability : 1 kg
- Calibration included
- Calibratable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 1036HR-F

The PCE-VE 1036HR-F is a versatile inspection instrument. Various borescope or borescope camera cables with different characteristics can be connected to the borescope. A special advantage of this industrial borescope is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The borescope camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording. The clear resolution is also clear when the images are stored in the endoscope by touching the stylus on the inserted SD card.


- 2-way borescope cable (cable / camera head diameter: 6 mm / 0.24 in)
- Storing images and video
- 8 GB Memory Card incl.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: VIS 350

With its rotatable camera head, the VIS 350 industrial borescope provides extraordinary access to hard-to-reach places, offering exceptional viewing options inside narrow tubes, shafts and columns. The lens delivers precise pictures of cracks, broken welds or seals to the full-color display. The rotating camera head features.


- 40 mm / 1.58" diameter
- 360 ° pan with 180 ° tilt
- 12 white LEDs
- Includes SD card memory

 

Manufacturer: Wöhler Messgeräte Kehrgeräte GmbH
Test Instruments manufacturer
Order no.: PCE-VE 1036HR-F

The PCE-VE 1036HR-F is a versatile inspection instrument. Various inspection camera or endoscope cables with different characteristics can be connected to the endoscope. A special advantage of the endoscope is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The endoscope allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording. The clear resolution is also clear when the images are stored in the endoscope by touching the stylus on the inserted SD card.


- 3 m / 0.24 in cable endoscope with 2-way endoscope cable
- Stores images and video
- 8 GB Memory Card incl.

 

Manufacturer: PCE Instruments
Test Instruments manufacturer